RETAINER-BRG. 5K4385 - Caterpillar

TARGET="_parent">Window Washer Reservoir - Fill
Window Wiper - Inspect/Replace
Windows - Clean
Every 10 Service Hours or Daily
Cooling System Coolant Level - Check
Engine Oil Level - Check
Fuel System Water Separator - Drain
Fuel Tank Water and Sediment - Drain
Hydraulic System Oil Level - Check
Indicators and Gauges - Test
Seat Belt - Inspect
Track Adjustment - Inspect
Travel Alarm - Test
Every 10 Service Hours or Daily for First 50 Hours
Boom and Stick Linkage - Lubricate
Bucket Linkage - Lubricate
Bucket Linkage - Lubricate
Every 50 Service Hours
Bucket Linkage - Lubricate
Every 100 Service Hours
Bucket Linkage - Lubricate
Every 250 Service Hours
Cooling System Coolant Sample (Level 1) - Obtain
Engine Oil Sample - Obtain
Every 250 Service Hours of Continuous Hammer Use
Hydraulic System Oil Filter (Return) - Replace
Every 250 Service Hours of Partial Hammer Use (50% of Service Hours)
Oil Filter (Hydraulic Hammer) - Replace
Initial 500 Service Hours
Final Drive Oil - Change
Swing Drive Oil - Change
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours
Boom and Stick Linkage - Lubricate
Engine Oil and Filter - Change
Final Drive Oil Level - Check
Final Drive Oil Sample - Obtain
Hydraulic System Oil Sample - Obtain
Pump Coupling Oil Level - Check
Swing Bearing - Lubricate
Swing Drive Oil Level - Check
Swing Drive Oil Sample - Obtain
Every 500 Service Hours of Partial Hammer Use (50% of Service Hours)
Hydraulic System Oil Filter (Return) - Replace
Every 600 Service Hours of Continuous Hammer Use
Hydraulic System Oil - Change
Every 1000 Service Hours
Battery - Clean
Battery Hold-Down - Tighten
Belt - Inspect/Adjust/Replace
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel System Secondary Filter - Replace
Swing Drive Oil - Change
Every 1000 Service Hours of Partial Hammer Use (50% of Service Hours)
Hydraulic System Oil - Change
Every 2000 Service Hours
Final Drive Oil - Change
Receiver Dryer (Refrigerant) - Replace
Swing Gear - Lubricate
Fuel Cap Filter - Replace
Every Year
Cooling System Coolant Sample (Level 2) - Obtain
Every 2500 Service Hours
Engine Valve Lash - Check
Every 3000 Service Hours
Hydraulic System Oil Filter (Return) - Replace
Every 5000 Service Hours
Pump Coupling Oil - Change
Every 6000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
Hydraulic System Oil - Change
Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - Replace
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change