RETAINER 5M7959 - Caterpillar

Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed.The user is responsible for the performance of maintenance. All adjustments, the use of proper lubricants, fluids, filters, and the replacement of components due to normal wear and aging are included. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components.Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, in order to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Refer to the maintenance procedure for any other exceptions that may change the maintenance intervals.Before each consecutive interval is performed, all maintenance from the previous interval must be performed.When Required
Pump (Power End) Gears - Inspect
Daily
Pump (Fluid End) Discharge Flanges and Seals - Inspect
Pump (Power End) Lube Oil Level - Check
Pump (Power End) Lube Oil Pressure - Check
Pump (Power End) Lube System - Check
Every Week
Pump (Fluid End) Discharge Flanges and Seals - Inspect
Pump (Fluid End) Suction Pulsation Dampener - Check
Pump (Fluid End) Valves, Seats, and Springs - Inspect
Pump (Power End) Lube Suction Strainer - Clean
Initial 50 Service Hours
Pump (Power End) Lube Suction Strainer - Clean
Initial 100 Service Hours
Pump (Power End) Lube Oil - Change
Pump (Power End) Lube Oil Filter - Replace
Every 100 Service Hours or Monthly
Pump (Fluid End) Mounting Bolts - Check
Pump (Power End) Lube Oil Filter - Replace
Pump (Power End) Lube Suction Strainer - Clean
Every 250 Service Hours or 3 Months
Pump (Fluid End) Plungers and Packing - Inspect
Pump (Power End) Breather - Clean
Pump (Power End) Lube Oil - Change
Pump (Power End) Lube Suction Strainer - Clean
Every 500 Service Hours or 6 Months
Pump (Power End) Connection Rod Bearings - Inspect
Every 1000 Service Hours or 1 Year
Pump (Fluid End) Discharge Flanges and Seals - Inspect
Pump (Fluid End) Plungers and Packing - Inspect
Pump (Fluid End) Suction Manifold Seals - Replace
Every 3000 Service Hours
Pump (Power End) Connection Rod Bearings - Inspect