RETAINER 6D0193 - Caterpillar

Table 2
Required Parts
To install the improved mid-core support.    
Item     Qty     Part Number     Description    
6     1     361-2152     Bracket As    
7     12     212-7566     Bracket    
8     24     5S-7382     Bolt    
9     24     9B-7237     Bolt    
10     8     4L-9337     Bolt    
11     56     5P-1075     Hard Washer    
12 (1)     2     389-9093     Support Block    
( 1 ) Required for D11R only
Table 3
Weld Specifications    
Weld Item     Weld Description    
W1    
6 mm (0.24 inch) fillet weld    Rework Procedure
To Update the Two Center and Two End Hold Down Brackets
Remove the existing center and end hold down brackets.
Illustration 1 g02647189
Replace with the new parts, as shown in Illustration 1. Each of the brackets uses two bolts (5) and two washers (4). Retainer (1) and retainer (3) will go on the end of the radiator and retainers (2) will go in the center.To Install the Improved Mid-core Support
Note: Step 1 is for D11R only.
Illustration 2 g02791244
View of RH side of radiator. (A) 761.5 mm (30 inch)
Illustration 3 g02791482
View of LH side channel of radiator. (B) 9 mm (0.35 inch) (W1) 6 mm (0.24 inch) fillet weld
Remove existing blocks from the side channels. Weld (W1) the two support blocks (12) to the side channels.
Remove the existing mid-core support plate.
Illustration 4 g02655516
Loosely assemble brackets (7) to the cores using bolts (8) and washers (11). Leave the bolts hand tight.
Illustration 5 g02655525
Loosely assemble bracket (6) to brackets (7) using bolts (9) and washers (11). Leave the bolts hand tight.
Illustration 6 g02655539
Loosely assemble bracket (6) to the side channel mounting blocks using bolts (10) and washers (11) .
Torque bolts (10) to 47 9 N m (35 7 lb ft).
Lightly tighten bolts (8) holding bracket (7) to the cores.
Lightly tighten bolts (9) holding bracket as (6) to bracket (7) .
Torque bolts (8) holding bracket (7) to the cores to 47 9 N m (35 7 lb ft).
Torque bolts (9) holding bracket as (6) to bracket (7) to 47 9 N m (35 7 lb ft).