RETAINER 6D5510 - Caterpillar

Illustration 1 g03295277Note: The rotation and elevation stops set the boundaries for the area in which the cannon is allowed to travel.The cannon is shipped with rotation stops at 90 degrees right, and at 90 degrees left. All other positions are achieved by switching the factory set stop and the plug in the desired stop location. Both stops (1) and plugs (2) ( 3) have a one and a half inch hex head. Plug (3) in the illustration is the front of the cannon. Water Cannon position on the machine
Illustration 2 g03295316
(3) Cab
(4) Tank Assemble cannon (5) to the flange mount on the tank. The front of the cannon should be 45 degrees to the right of center line (6). The cannon is shipped with the first stop assembled at 90 degrees. The cannon cannot rotate past the 90 degree stop and will not point at the cab.Note: If the cannon is mounted in a different location, the cannon must be orientated so the stops will not allow the cannon to point at the cab.