RETAINER-BEARING 6L9751 - Caterpillar

Illustration 1 g03796370
(1) Hinged access door
(2) Fold down access door
Illustration 2 g03796378
Inside view of right-hand engine access doors
(1) Hinged access door
(2) Fold down access door
(3) Retaining pin Hinged Access Door (1)
Open hinged access door (1) by raising the latch handle and turning the latch handle. The door can then be swung open on the hinges at the rear of the door.
If desired, remove the hinged access door by lifting the door from the hinges after swinging the door open.
If removed, store the hinged access door in a secure location while service is being performed on the machine. Fold Down Access Door (2)
The bottom of fold down access door (2) is held in position by two tabs that fit into slots on the bottom of the door. The top of fold down access door is held in position by retaining pin (3) at the top of the door.
Open hinged access door (1) to allow access to the inside of the engine compartment.
Reach forward on the inside of the fold down access door to remove retaining pin (3).
Tilt out the top of the fold down access door and rest the top of the door on the rear wheel of the machine.
If desired, remove the door by tilting out the top of the door and then lifting the door from the retaining tabs at the bottom.
If removed, store the fold down access door in a secure location while service is being performed on the machine. Installation of Doors
Once service of the machine is completed, install the doors or close the doors by reversing the procedures described above.