RETAINER 6T7531 - Caterpillar

Illustration 7 g03714757
Remove bolts (17) and the clamp assemblies from the engine. Place cable assemblies (4), (13), and (14) out of the way.
Illustration 8 g03714761
Remove the cable straps securing harness assembly (3) to the top of the engine.
Disconnect hose assembly (18) .
Illustration 9 g03714802
Disconnect connector (19) .
Remove the cable straps securing harness assembly (3) to the side of the engine.
Illustration 10 g03714808
Disconnect hose assembly (20) .
Remove the bolts and move hose assembly (21) out of the way.
Disconnect the hose assemblies from gear pump (22) .
Remove the cable straps securing harness assembly (3) to the side of the engine.
Illustration 11 g03714814
Loosen the bolt and disconnect harness assembly (23) .
Illustration 12 g03714842
Remove the nut and wire assembly (24) .
Illustration 13 g03714843
Disconnect harness assembly (25) .
Illustration 14 g03714844
Remove the cable straps securing harness assembly (25) to the ladder clips.
Illustration 15 g03714870
Disconnect hose assemblies (26), (27), and (28) from the fuel filters.
Remove the cable straps securing harness assembly (24) to the engine.
Illustration 16 g03714883
Remove the bolts, the plate, and clamps (29). Move hose assemblies out of the way.
Remove the bolts, the plate, and clamps (30). Move harness assembly out of the way.
Illustration 17 g03714884
Loosen clamp (31) .
Illustration 18 g03714912
Remove two nuts (33), the two washers, and the U-bolt. Remove tube assembly (32) from the turbo.
Illustration 19 g03714885
Attach Tooling (A) and a suitable lifting device to engine (34). The weight of engine (34) is approximately 780 kg (1720 lb).
Illustration 20 g03715201
Remove 12 bolts (35) from the rear of engine (34) .
Remove two bolts (36), the two washers, the two flexible mounts, and engine (34) .