RETAINER 7D0028 - Caterpillar

Illustration 1 g03444896
(1) Line Relief Valve (Head End) (Tilt) (2) Line Relief Valve (Ride Control) (3) Line Relief Valve (Head End) (Auxiliary)
Illustration 2 g03444897
(4) Line Relief Valve (Rod End) (Tilt) (5) Line Relief Valve (Rod End) (Auxiliary)The line relief valve is installed to regulate pressure spikes from either the implement pump or any unusual outside forces acting on the work tool. When the pressure is higher than the setting of the line relief valve, the relief valve opens. This process allows high pressure to return to the hydraulic tank. The line relief valves prevent high pressure from damaging any components in the hydraulic system.Direct Operated Line Relief Valve
Illustration 3 g03445390
(6) Locknut (7) Valve body (8) Passage to the hydraulic tank (9) Poppet (10) Adjustment screw (11) Spring (12) Passage to work portWork port oil flows into passage (12). Spring (11) holds poppet (9) in the closed position. Poppet (9) will open when oil pressure in passage (12) is greater than the force of spring (11). The oil will flow past the poppet into passage (8). The oil returns to the tank.The relief valve pressure can be adjusted. Turn adjustment screw (10) clockwise in order to increase relief pressure. Turn adjustment screw (10) counterclockwise in order to decrease relief pressure.ReferenceFor additional information about line relief valves, refer to the Service Manual module for Testing and Adjusting, "Relief Valve (Line) - Test and Adjust".