7D8066 RETAINER Caterpillar parts
120B, 12F, 140B, 14E
Rating:
Alternative (cross code) number:
CA7D8066
7D-8066
7D8066
CA7D8066
7D-8066
7D8066
Weight: 1 pounds 0 kg.
Information:
MATERIAL THICKNESS
12.192
mm
NUMBER OF PITCH HOLES
2
OD
95.25
mm
PITCH CIRCLE DIAMETER
45.72
mm
PITCH CIRCLE HOLE DIAMETER
13.494
mm
MOTOR GRADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 7D8066 Retainer Ring for Heavy Equipment
CTP Ring Only || Sold in each || Easy in-and-out fit
CTP Ring Only || Sold in each || Easy in-and-out fit
CTP 7D8066 Retainer Ring for Heavy Equipment
CTP Ring Only || Sold in each || Easy in-and-out fit
CTP Ring Only || Sold in each || Easy in-and-out fit
Number on catalog scheme:
None
For full view, you need register
Information:
Illustration 1 g03017457
Table 1
Specification for 211-8184 Auxiliary Drive Gp
Item Qty Part Specification Description
1 1 107-0777 Pump Drive Shaft As Diameter is 74.900 0.015 mm (2.9488 0.0006 inch).
Width of the groove for the thrust washer is 8.75 0.10 mm (0.344 0.004 inch).
During assembly, flush the bushing with the pump drive shaft to 0.5 mm ( 0.02 inch).
2 1 107-0779 Adapter As During assembly, align the hole in the bushing with the adapter.
Bore of 127-5400 Bushing after assembly is 75.000 0.055 mm (2.9527 0.0022 inch).
Installation depth of 127-5400 Bushing is 1.5 0.5 mm (0.06 0.02 inch).
3 2 259-4598 O-Ring Seal Before assembly, lightly lubricate the bore with the fluid that is being sealed.
4 1 199-2889 Idler Shaft Diameter is 105.880 0.020 mm (4.1685 0.0008 inch).
5 2 7N-5246 Thrust Washer Thickness is 8.50 0.05 mm (0.335 0.002 inch).
6 1 235-3546 O-Ring Seal Before assembly, lightly lubricate the bore with the fluid that is being sealed.
7 1 155-2307 Idler Gear As Bore of 116-1365 Bearing after assembly is 105.970 0.010 mm (4.1720 0.0004 inch).
Installation depth of the bearing 2.3 0.5 mm (0.09 0.02 inch).
8 1 164-4995 Washer Assembly Thickness of 164-4996 Thrust Washer is 7.00 0.15 mm (0.276 0.006 inch).
Protrusion of 7N-2047 Dowel is 4.5 0.5 mm (0.18 0.02 inch).
9 1 7E-6748 Adapter As During assembly, align the hole in the bushing with the adapter.
Bore of 127-5400 Bushing after assembly is 75.000 0.055 mm (2.9527 0.0022 inch).
Installation depth of 127-5400 Bushing is 6.5 0.5 mm (0.26 0.02 inch).
Caterpillar parts catalog:
Parts retainer Caterpillar catalog:
14E, 24H, 24M, 30/30, 517, 518, 518C, 527, 561M, 572G, 572R II, 578, 583R, 587R, 587T, 589, 594, 611, 613, 613B, 613C, 613C II, 613G, 615, 615C, 65, 651E, 657B, 657E, 65C, 65E, 7211, 75, 75C, 75D, 75E...
14E, 517, 518C, 527, 528, 528B, 530B, 561D, 621, 621B, 621E, 621F, 621G, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631C, 631E, 631G, 633D, 633E II, 637D, 637E, 637G, 657B, 7221, ...
120, 120B, 12F, 140, 140B, 14E, 16, 16G, 235, 235C, 245, 3304, 3304B, 3306, 3606, 3608, 5130, 5130B, 5230, 5230B, 528, 528B, 530B, 561C, 561D, 572G, 578, 589, 594, 594H, 613, 621, 621E, 621F, 621R, 62...
12G, 140B, 16G, 16H NA, 227, 229, 235C, 235D, 24H, 631E, 631G, 633E, 637E, 637G, 651E, 657E, 963, 973, D5E, D5H, D5H XL, D5M, D6D, D6E, D6G SR, D6H, D6H II, D6H XL, D6H XR, D6M, D6R, D7G, D7H, E110, E...
120B, 12E, 140B, 14E
120B, 12E, 140B, 14E
120B, 12E, 140B, 14E
120B, 12E, 140B, 14E
120, 120B, 12E, 12F, 140B, 14E
120B, 12E, 12F, 140, 140B, 14E
120B, 140B
2Y1223
RETAINER
120B
120B
6D276
RETAINER
12F
12F
6D275
RETAINER
12F
12F
7D0247
RETAINER ASSEM.
12F, 14E, 16
12F, 14E, 16
6D4933
RETAINER
12F, 14E, 16
12F, 14E, 16
6D4930
RETAINER
12F, 14E, 16
12F, 14E, 16
120G, 12G, 130G, 140G, 14G, 16G
8D7342
RETAINER
16G
16G
8D2342
RETAINER
14E
14E
8D2331
RETAINER
14E
14E
4D0903
RETAINER
140, 140B, 14E, 16
140, 140B, 14E, 16