RETAINER-SEAL 9C8007 - Caterpillar

Illustration 1 g00337898
Engine Coolant Temperature (1) - This gauge indicates the tractor engine coolant temperature. The normal operating range is between 40°C (104°F) and 120°C (248°F). If the needle exceeds 120°C (248°F), stop the engine immediately and investigate the cause of the problem. Do not operate the machine until the cause of the problem has been corrected.
Engine Coolant Temperature (2) - This gauge indicates the scraper engine coolant temperature. The normal operating range is between 40°C (104°F) and 120°C (248°F). If the needle exceeds 120°C (248°F), stop the engine immediately and investigate the cause of the problem. Do not operate the machine until the cause of the problem has been corrected.
Converter/Retarder Oil Temperature (3) - This gauge indicates the converter/retarder oil temperature of the tractor. The normal operating range is between 120°C (248°F) and 132°C (270°F). If the needle exceeds 132°C (270°F), reduce the load on the machine. If the needle stays in the red range, stop the machine and investigate the cause of the problem. Do not operate the machine until the cause of the problem has been corrected.
Converter/Retarder Oil Temperature (4) - This gauge indicates the converter/retarder oil temperature of the scraper. The normal operating range is between 120°C (248°F) and 132°C (270°F). If the needle exceeds 132°C (270°F), reduce the load on the machine. If the needle stays in the red range, stop the machine and investigate the cause of the problem. Do not operate the machine until the cause of the problem has been corrected.Note: If the engine coolant or converter/retarder oil temperatures exceed maximum operating temperatures, the respective alert indicators will come on and the action light will blink.
Fuel Tank (5) - This gauge indicates the amount of fuel that is remaining in the fuel tank. Speedometer (6) - The speedometer displays the machine ground speed during machine operation.
Tachometer (7) - The tachometer displays the engine rpm during machine operation.
Service Hour Meter (8) - The service hour meter indicates the total operating hours of the engine. The service hour meter should be used to determine the service intervals for the machine.
Illustration 2 g00337905
Air Pressure (9) - This gauge indicates the air pressure in the air tanks in kPa (psi). The operating pressure is above 450 kPa (65 psi). When air pressure falls below 450 kPa (65 psi), the brake air pressure indicator and the action light will come on and the action alarm will sound.When the air pressure falls below 275 kPa (40 psi), the parking and secondary brake will engage automatically and the parking brake indicator light will activate. Do not operate the machine until the cause of the problem has been corrected.
Illustration 3 g00475122
The control panel for the scraper has a service hour meter that is located on the panel.
Service Hour Meter (10) - The service hour meter indicates the total operating hours of the engine. The service hour meter should be used to determine the service intervals for the machine.