9U0585 RETAINER Caterpillar parts
988G, 988H, 988K, 990, 990 II, 990H, 990K, 992G
Rating:
Alternative (cross code) number:
CA9U0585
9U-0585
9U0585
CA9U0585
9U-0585
9U0585
Weight: 2 pounds 1 kg.
WHEEL LOADER,
Compatible equipment models: 9U0585:
Number on catalog scheme:
3
For full view, you need register
Information:
Installation of Retainers
The retainers for the K110, K130, K150, and K170 bucket tips must be installed correctly. The bucket tips will become loose if the retainers are installed incorrectly. The retainers are not driven into position with a hammer. The retainers are pressed into position with a pry bar.The retainer must be positioned deeply in the cavity of the tip in order to secure the tip and the adapter properly. The latch on the retainer will not engage properly if the bucket tips have the following conditions: packed dirt, excessive paint and weld spatter in the area of the retainer.Make a visual check in order to make sure that the latch is properly engaged. The latch is properly engaged when release (A) is tight against the wall of the tip. The seat for the latch will not be visible, if the latch is properly engaged. Refer to the illustrations for the proper installation of the retainer.
Illustration 1 g01190464
Typical Retainer (A) Release for the latch (B) Latch
Illustration 2 g01190469
Installation Of The Retainer (C) Bucket tip (D) Pry bar (E) Adapter (F) Retainer
Illustration 3 g01190471
Correctly Installed Retainer (A) Release for the latchRemoval of Retainers
During bucket operation, the adapter cavity that contains the retainer may become filled with compacted dirt or stone that makes retainer removal difficult. It may also be difficult to remove heavily rusted parts. Consider the following suggestions when you are removing the retainer.
The latch portion of the retainer must be free to move before the retainer can be removed. It is necessary to remove as much of the compacted material as possible before using a pry bar to remove the retainers. Use a small chisel, screwdriver, putty knife, seal pick, wire brush, or compressed air to remove the compacted material. Several sizes of pry bars are available for retainer installation and removal purposes. Refer to Table 1 for recommended pry bars.
Table 1
Recommended Pry Bars
Part Number Description Tip Width Bar Length Recommended Usage
239-4141 Pry Bar
228.6 mm (9/16 inch)
300 mm (12 inch) NA
239-4142 Pry Bar
127 mm (5/8 inch)
460 mm (18 inch) K150-K130
239-4143 Pry Bar
330.2 mm (13/16 inch)
610 mm (24 inch) K150-K170
263-0039 Pry Bar
177.8 mm (7/8 inch)
910 mm (36 inch) NA After the packed material is removed and the retainer can be easily moved, the short 12 inch pry bar may be more convenient to use. The 36 inch pry bar may be necessary for difficult K150 and K170 retainers.The pry bar blade must be inserted between the latch and the back edge of the tip in order to release the latch. The pry bar blade can then be used to pry the retainer out of engagement with the tip. Refer to Illustration 4.
Illustration 4 g01240339
Removal Of The Retainer (C) Bucket tip (D) Pry bar (E) Adapter (F) RetainerNote: The tip
The retainers for the K110, K130, K150, and K170 bucket tips must be installed correctly. The bucket tips will become loose if the retainers are installed incorrectly. The retainers are not driven into position with a hammer. The retainers are pressed into position with a pry bar.The retainer must be positioned deeply in the cavity of the tip in order to secure the tip and the adapter properly. The latch on the retainer will not engage properly if the bucket tips have the following conditions: packed dirt, excessive paint and weld spatter in the area of the retainer.Make a visual check in order to make sure that the latch is properly engaged. The latch is properly engaged when release (A) is tight against the wall of the tip. The seat for the latch will not be visible, if the latch is properly engaged. Refer to the illustrations for the proper installation of the retainer.
Illustration 1 g01190464
Typical Retainer (A) Release for the latch (B) Latch
Illustration 2 g01190469
Installation Of The Retainer (C) Bucket tip (D) Pry bar (E) Adapter (F) Retainer
Illustration 3 g01190471
Correctly Installed Retainer (A) Release for the latchRemoval of Retainers
During bucket operation, the adapter cavity that contains the retainer may become filled with compacted dirt or stone that makes retainer removal difficult. It may also be difficult to remove heavily rusted parts. Consider the following suggestions when you are removing the retainer.
The latch portion of the retainer must be free to move before the retainer can be removed. It is necessary to remove as much of the compacted material as possible before using a pry bar to remove the retainers. Use a small chisel, screwdriver, putty knife, seal pick, wire brush, or compressed air to remove the compacted material. Several sizes of pry bars are available for retainer installation and removal purposes. Refer to Table 1 for recommended pry bars.
Table 1
Recommended Pry Bars
Part Number Description Tip Width Bar Length Recommended Usage
239-4141 Pry Bar
228.6 mm (9/16 inch)
300 mm (12 inch) NA
239-4142 Pry Bar
127 mm (5/8 inch)
460 mm (18 inch) K150-K130
239-4143 Pry Bar
330.2 mm (13/16 inch)
610 mm (24 inch) K150-K170
263-0039 Pry Bar
177.8 mm (7/8 inch)
910 mm (36 inch) NA After the packed material is removed and the retainer can be easily moved, the short 12 inch pry bar may be more convenient to use. The 36 inch pry bar may be necessary for difficult K150 and K170 retainers.The pry bar blade must be inserted between the latch and the back edge of the tip in order to release the latch. The pry bar blade can then be used to pry the retainer out of engagement with the tip. Refer to Illustration 4.
Illustration 4 g01240339
Removal Of The Retainer (C) Bucket tip (D) Pry bar (E) Adapter (F) RetainerNote: The tip
Cat SIS web machinery list:
Parts retainer Caterpillar catalog:
235C, 322B L, 322B LN, 322C, 323D L, 323D2 L, 324D, 325 L, 325B L, 325C, 325D, 326D L, 329D, 329D L, 330, 330B, 330B L, 330C, 330C L, 330D, 330D L, 336D, 336D2, 336E, 336E H, 340D L, 340D2 L, 345B II,...
318C, 320B, 320C, 320D, 320D GC, 320D L, 320D LRR, 320D RR, 320D2, 320E, 320E L, 321C, 321D LCR, 322B L, 322C, 323D L, 323D2 L, 324D, 324D L, 324E L, 324E LN, 325B L, 325C, 325D, 325D L, 326D L, 329D,...
235, 245, 245D, 322 FM L, 322B L, 325, 325B L, 330, 330 L, 330B L, 350, 375, 950H, 962H, 988H, 990, 990 II, 992C, 992D, 994, 994D, 994F, 994H
235C, 245B, 245D, 322B L, 324D, 325B L, 328D LCR, 330, 330B L, 330C L, 330D L, 336D, 336D2, 336E, 336E H, 340D L, 340D2 L, 345B, 345B II, 345B L, 345C, 345C L, 345D, 345D L, 349D, 349D L, 349E, 349E L...
120G, 12G, 130G, 140G, 14G, 14H, 14H NA, 160G, 16G, 16H, 16H NA, 515, 518, 518C, 525, 525B, 525C, 527, 535B, 535C, 545, 545C, 611, 613, 613B, 613C, 613C II, 613G, 615, 615C, 814, 814B, 814F, 815, 815B...
594, 594H, 627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 637, 637B, 637D, 637E, 637G, 769, 826C, 834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 844, 844H, 844K, 854G, 854K, 972G, 980, 980B, 980C,...
24H, 24M, 641B, 651E, 657B, 657E, 657G, 69D, 735, 735B, 740, 740B, 769C, 769D, 770, 770G, 770G OEM, 771C, 771D, 772, 772G, 772G OEM, 773B, 773D, 773E, 773F, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F,...
824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 980G, 980G II, 980H, 980K, 980K HLG, 986H, 988F, 988F II, 988G, 988H, 98...
345C L, 365B, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 390D, 5080, 5090B, 5110B, 992C, 992G, 994, 994D, 994F
825C, 826C, 834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 980, 980B, 980C, 986H, 988B, 988F, 988F II, 988G, 988H, 988K, 994, 994D, 994F, 994H, AD40, AD45, AD45B, AD55, AD55B, AD60, AE40, AE40 II, R29...
345B II, 345C L, 350, 365B, 365B II, 365C, 365C L, 374D L, 375, 375 L, 385B, 385C, 385C L, 390D, 5080, 5110B, 5230, 988H, 988K, 990, 990 II, 990H, 992G
349E L, 349E L VG, 365B, 365B L, 365C, 365C L, 374D L, 385B, 385C, 385C FS, 385C L, 390D, 390D L, 990 II, 990H, 990K, 992G, 992K
844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992G, 992K
1159976
RETAINER
824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 950G, 950G II, 950H, 950K, 962G, 962G II, 962H, 962K, 966G, 966G II, 966H, 972G, 972G II, 972H, 980G, 980G II, 980H
824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 950G, 950G II, 950H, 950K, 962G, 962G II, 962H, 962K, 966G, 966G II, 966H, 972G, 972G II, 972H, 980G, 980G II, 980H
1070071
RETAINER
824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 950G, 950G II, 950H, 950K, 962G, 962G II, 962H, 962K, 966G, 966G II, 966H, 972G, 972G II, 972H, 980G, 980G II, 980H
824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 950G, 950G II, 950H, 950K, 962G, 962G II, 962H, 962K, 966G, 966G II, 966H, 972G, 972G II, 972H, 980G, 980G II, 980H
1228813
RETAINER AS
824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 836G, 836H, 950G, 962G, 980G, 980G II, 980H
824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 836G, 836H, 950G, 962G, 980G, 980G II, 980H
9J2414
RETAINER
988B, 988F, 988F II
988B, 988F, 988F II
1516972
RETAINER
990 II, 990H, 990K
990 II, 990H, 990K
2331564
RETAINER AS
988G
988G
1185085
RETAINER
365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, 69D, 769D, 770, 770G, 770G OEM, 771D, 772, 772G, 772G OEM, 773D, 773E, 773F, 773G, ...
365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, 69D, 769D, 770, 770G, 770G OEM, 771D, 772, 772G, 772G OEM, 773D, 773E, 773F, 773G, ...
6E3775
RETAINER
834G, 834H, 836G, 836H, 844, 844H, 844K, 854G, 854K, 988G, 988H, 990, 990 II, 990H, 990K, 992G, 992K, 993K
834G, 834H, 836G, 836H, 844, 844H, 844K, 854G, 854K, 988G, 988H, 990, 990 II, 990H, 990K, 992G, 992K, 993K
1290822
RETAINER-BEARING
834G, 834H, 836G, 836H, 988G, 988H
834G, 834H, 836G, 836H, 988G, 988H
1194258
RETAINER-BEARING
834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 986H, 988F II, 988G, 988H, 988K
834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 986H, 988F II, 988G, 988H, 988K
814F, 814F II, 815F, 815F II, 816F, 816F II, 824C, 824G II, 824H, 824K, 825G II, 825H, 825K, 826G II, 826H, 826K, 834G, 834H, 834K, 836G, 836H, 836K, 844, 844H, 844K, 854G, 854K, 980G, 980G II, 988G, ...