1329681 RIM AS Caterpillar parts
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 160G, 160H, 160H ES, 160H NA
Rating:
Alternative (cross code) number:
CA1329681
132-9681
1329681
CA1329681
132-9681
1329681
MOTOR GRADER,
Compatible equipment models: 1329681:
Information:
Crushing Hazard (4)This safety message is located inside cab.
Illustration 5 g03094541
Crush Hazard! A machine may move unexpectedly and without warning resulting in personal injury or death.Before leaving the machine lower the work tool to the ground, lock operator controls, shut off the engine and remove the key.
High Pressure Cylinder (5)This Safety message is positioned on the track adjusters.
Illustration 6 g02061296
High Pressure Cylinder. Do not remove any parts from the cylinder until all of the pressure has been relieved. This will prevent possible personal injury or death.
Explosion Hazard (6)This safety message is located at rear of the machine.
Illustration 7 g03229317
Personal injury can result from improper troubleshooting and repair procedures.The following troubleshooting and repair procedures should only be performed by qualified personnel familiar with this equipment.
Cutting Hazard (7)This safety message is located at the rear of the machine.
Illustration 8 g02061677
Cutting Hazard! Keep hands clear of fan while engine is running. May cause serious injury or death.
Rotating Fan (8)This safety message is located at the rear of the machine.
Illustration 9 g03369790
Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
Jump Start Cables (9)This warning is located at rear of the machine.
Illustration 10 g03369796
Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
Falling Hazard (10)This safety message is located on lift arm.
Illustration 11 g03369781
Do not use this surface as a step or platform. This surface may not support additional weight or may be slippery. Serious injury or death could occur from a fall.
Illustration 5 g03094541
Crush Hazard! A machine may move unexpectedly and without warning resulting in personal injury or death.Before leaving the machine lower the work tool to the ground, lock operator controls, shut off the engine and remove the key.
High Pressure Cylinder (5)This Safety message is positioned on the track adjusters.
Illustration 6 g02061296
High Pressure Cylinder. Do not remove any parts from the cylinder until all of the pressure has been relieved. This will prevent possible personal injury or death.
Explosion Hazard (6)This safety message is located at rear of the machine.
Illustration 7 g03229317
Personal injury can result from improper troubleshooting and repair procedures.The following troubleshooting and repair procedures should only be performed by qualified personnel familiar with this equipment.
Cutting Hazard (7)This safety message is located at the rear of the machine.
Illustration 8 g02061677
Cutting Hazard! Keep hands clear of fan while engine is running. May cause serious injury or death.
Rotating Fan (8)This safety message is located at the rear of the machine.
Illustration 9 g03369790
Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
Jump Start Cables (9)This warning is located at rear of the machine.
Illustration 10 g03369796
Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
Falling Hazard (10)This safety message is located on lift arm.
Illustration 11 g03369781
Do not use this surface as a step or platform. This surface may not support additional weight or may be slippery. Serious injury or death could occur from a fall.
Caterpillar parts catalog:
Parts rim Caterpillar catalog:
8X1160
RIM AS
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 160H, 160H ES, 160H NA, 160K
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 160H, 160H ES, 160H NA, 160K
6G1528
RIM AS
120H, 120H ES, 12H, 12H ES, 12H NA, 140G, 140H, 140H ES, 140H NA, 143H, 160H, 160H ES, 160H NA, 163H NA
120H, 120H ES, 12H, 12H ES, 12H NA, 140G, 140H, 140H ES, 140H NA, 143H, 160H, 160H ES, 160H NA, 163H NA
1233420
RIM AS
120G, 120H, 120H ES, 120H NA, 120K, 12G, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H
120G, 120H, 120H ES, 120H NA, 120K, 12G, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H
6G1527
RIM AS
120G, 120H, 120M, 12G, 12H, 12H ES, 12H NA, 12M, 135H, 140G, 140H, 140H NA, 140M, 160M
120G, 120H, 120M, 12G, 12H, 12H ES, 12H NA, 12M, 135H, 140G, 140H, 140H NA, 140M, 160M
2901510
RIM AS
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 160H, 160H ES, 160H NA, 163H, 163H NA
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 160H, 160H ES, 160H NA, 163H, 163H NA
2899725
RIM AS
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
1138201
RIM AS
12H ES, 143H, 163H NA
12H ES, 143H, 163H NA
1149169
RIM
12H ES, 143H, 163H NA
12H ES, 143H, 163H NA
2901513
RIM AS
120H, 120H NA, 12H, 135H, 140H, 140H ES, 143H, 160H, 163H, 163H NA
120H, 120H NA, 12H, 135H, 140H, 140H ES, 143H, 160H, 163H, 163H NA
2520098
RIM AS
120H, 120K, 120K 2, 120M, 120M 2, 12H, 12H NA, 12K, 12M, 12M 2, 12M 3, 135H, 140H, 140K, 140K 2, 140M, 140M 2, 140M 3, 160K, 160M, 160M 2, 160M 3
120H, 120K, 120K 2, 120M, 120M 2, 12H, 12H NA, 12K, 12M, 12M 2, 12M 3, 135H, 140H, 140K, 140K 2, 140M, 140M 2, 140M 3, 160K, 160M, 160M 2, 160M 3
8X1658
RIM AS
160H
160H
1842309
RIM AS
120H, 12H, 12H NA, 140H, 140H NA
120H, 12H, 12H NA, 140H, 140H NA
8X1160
RIM AS
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 160H, 160H ES, 160H NA, 160K
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 160H, 160H ES, 160H NA, 160K
8W8337
RIM AS
120G, 12G, 130G, 135H, 140G, 160G
120G, 12G, 130G, 135H, 140G, 160G
2G5745
RIM AS
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 160H, 160H ES, 160H NA, 163H NA
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 160H, 160H ES, 160H NA, 163H NA
7M5286
RIM ASSEM.
D9E, D9G
D9E, D9G
8V9702
RIM AS
824C
824C
2901510
RIM AS
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 160H, 160H ES, 160H NA, 163H, 163H NA
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 160H, 160H ES, 160H NA, 163H, 163H NA
2901507
RIM AS
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
1155753
RIM AS
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 160H, 160H ES, 160H NA, 163H NA
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 160H, 160H ES, 160H NA, 163H NA
6G1527
RIM AS
120G, 120H, 120M, 12G, 12H, 12H ES, 12H NA, 12M, 135H, 140G, 140H, 140H NA, 140M, 160M
120G, 120H, 120M, 12G, 12H, 12H ES, 12H NA, 12M, 135H, 140G, 140H, 140H NA, 140M, 160M
1233420
RIM AS
120G, 120H, 120H ES, 120H NA, 120K, 12G, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H
120G, 120H, 120H ES, 120H NA, 120K, 12G, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H
6G1528
RIM AS
120H, 120H ES, 12H, 12H ES, 12H NA, 140G, 140H, 140H ES, 140H NA, 143H, 160H, 160H ES, 160H NA, 163H NA
120H, 120H ES, 12H, 12H ES, 12H NA, 140G, 140H, 140H ES, 140H NA, 143H, 160H, 160H ES, 160H NA, 163H NA