RIM AS 1379862 - Caterpillar

Illustration 1 g02866428The machine may be equipped with a foldable rollover protective structure (ROPS), the ROPS must be in the raised position before you operate the machine. Before the machine is shipped, lower the ROPS in order to provide more clearance during transportation. The ROPS can be folded toward the front of the machine.Raise
Illustration 2 g02866431 In order to raise the ROPS, perform the following steps:
Support the upper mass ROPS using a crane and suitable rigging.
Remove the safety pin (1) and pull out the locking pin (2). Do so on both sides.
Lift the ROPS into the upright position.
Insert the locking pins and secure the locking pins with the safety pins. Lower
Illustration 3 g02866431 In order to lower the ROPS, perform the following steps:
Support the upper mass ROPS using a crane and suitable rigging.
Remove the safety pin (1) and pull out the locking pin (2). Do so on both sides.
Gently lower the upper mass. Note: When lowering the ROPS, do not allow the upper frame to fall into the lower position. Allowing the upper mass to slam will weaken the ROPS system and ultimately compromise the integrity and protection.
Insert the pins in the ROPS in the lower hole setting through the upper mass to secure the ROPS for transport.