RIM AS 2731640 - Caterpillar

Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 187-2718 Filter Wrench 1 Start By:
Remove the fuel filter housing. Refer to Disassembly and Assembly, "Fuel Filter Housing - Remove".
Remove the fuel priming pump, if equipped. Refer to Disassembly and Assembly, "Fuel Priming Pump - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00599245
Remove bolts (1). Remove bracket (2) from the fuel filter housing.
Illustration 2 g00599246
Use Tooling (A) and remove fuel filters (3).
Illustration 3 g00599247
Remove bolts and nuts (4).
Illustration 4 g00599248
Separate adapter (5) and bases (6). Remove O-ring seals (7) and (8) from each base. Note: Do not disassemble valve (10). Do not change the setting of valve (10).
Remove valve (10) and O-ring seals (9) from adapter (5).