4K4909 RIM ASSEM. Caterpillar parts
950
Rating:
Alternative (cross code) number:
CA4K4909
4K-4909
4K4909
CA4K4909
4K-4909
4K4909
Weight: 200 pounds 90 kg.
WHEEL LOADER,
Compare Prices:
As an associate, we earn commssions on qualifying purchases through the links below
$1,394.84
29 Dec 2022
US: QUALITY PARTS
Made to fit 4K4909 Rim 950 Seal 4K4879 Ring Lock 4K4881 Caterpillar New Aftermarket
G&T Engine Parts 4K4909 Rim 950 seal 4K4879 ring lock 4K4881 CAT Made to fit 4K4909 Rim 950 seal 4K4879 ring lock 4K4881 Caterpillar New Aftermarket || Meets OEM Specs for Fit and Performance || This is a new item 4K4909 Rim || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts 4K4909 Rim 950 seal 4K4879 ring lock 4K4881 CAT Made to fit 4K4909 Rim 950 seal 4K4879 ring lock 4K4881 Caterpillar New Aftermarket || Meets OEM Specs for Fit and Performance || This is a new item 4K4909 Rim || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
$1,059.84
25 Feb 2019
Unknown: Unknown
Caterpillar 4K4909 Rim Assy New
$1,162.37
24 May 2022
US: QUALITY PARTS
Made to fit 4K4909 Rim 950 Seal 4K4879 Ring Lock 4K4881 Caterpillar New Aftermarket
G&T Engine Parts 4K4909 Rim 950 seal 4K4879 ring lock 4K4881 CAT Made to fit 4K4909 Rim 950 seal 4K4879 ring lock 4K4881 Caterpillar New Aftermarket || Meets OEM Specs for Fit and Performance || This is a new item 4K4909 Rim || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts 4K4909 Rim 950 seal 4K4879 ring lock 4K4881 CAT Made to fit 4K4909 Rim 950 seal 4K4879 ring lock 4K4881 Caterpillar New Aftermarket || Meets OEM Specs for Fit and Performance || This is a new item 4K4909 Rim || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
Number on catalog scheme:
None
For full view, you need register
Compatible equipment models: 4K4909:
Caterpillar parts catalog:
Information:
Marine Engines:
3508B (S/N: 2BM; 3DM; 7SM; 1TW; 3DW)
3508 (S/N: 3PS; 3TS)
3512B (S/N: 7HM; 8EM; 4TN; 1PW; 2GW)
3512 (S/N: 3RS; 3WS)
3516B (S/N: 8CN; 8KN; 9AN; 2FW; 3CW)
3516 (S/N: 3SS; 3XS)
Generator Set Engines:
3508B (S/N: 4GM; 6PN; 2HW)
3508 (S/N: 1ZF; 5XM; 3LS)
3512B (S/N: 8RM; 6WN; 4AW)
3512 (S/N: 6PM; 3MS)
3516B (S/N: 6HN; 7RN)
3616 (S/N: 7KM; 3NS)
Gas Engines:
G3508 (S/N: 4WD; 2JF; 9TG; 9AW)
G3512 (S/N: 4KC; 5JD; 7NJ; 6JW)
G3516 (S/N: 3RC; 8LD; 4EK; 5PN; 8PW)
Engine News SEBD9268, July 1998, "114-2410 Digital Pyrometer Battery Shelf Life Extender". Disregard this article. The article has been replaced by the following article:A modification to the 114-2410 Pyrometer has increased the shelf life of the digital pyrometer battery from 1.5 years to 5 years. The battery shelf life will decrease with an increase in ambient temperatures. This modification is effective with 114-2410 Pyrometer serial numbers 4018 and Up.A Field Modification Procedure has been developed in order to provide increased shelf life to earlier pyrometers. This field modification is adaptable to 114-2410 Pyrometer serial numbers 3001 through 4017. This field modification can be performed when the pyrometer batteries are changed.Field Modification Procedure
Loosen the four screws that go through the front keypad so that the device comes apart.
Remove the three batteries.
Remove the three small screws that fasten the circuit board to the front keypad plate. Do NOT LOSE these screws.
Find the location of the resistor "R11B" on the display side of the circuit board. "R11B" is on the lower left corner of the circuit board. Use small wire cutters to carefully cut the leads at each end of the resistor "R11B". Use care not to damage the resistor "R11C". Resistor "R11C" is located immediately above resistor "R11B".
Use the three small screws that were retained in Step 3 to install the circuit board on the keypad plate.
Install three new batteries. The following batteries are recommended: Duracell PX28L, Sanyo 2CR-1/3N and Altronic 601258. Take note of the battery polarity during installation.
Reassemble the pyrometer and install the four screws that were removed in Step 2.
3508B (S/N: 2BM; 3DM; 7SM; 1TW; 3DW)
3508 (S/N: 3PS; 3TS)
3512B (S/N: 7HM; 8EM; 4TN; 1PW; 2GW)
3512 (S/N: 3RS; 3WS)
3516B (S/N: 8CN; 8KN; 9AN; 2FW; 3CW)
3516 (S/N: 3SS; 3XS)
Generator Set Engines:
3508B (S/N: 4GM; 6PN; 2HW)
3508 (S/N: 1ZF; 5XM; 3LS)
3512B (S/N: 8RM; 6WN; 4AW)
3512 (S/N: 6PM; 3MS)
3516B (S/N: 6HN; 7RN)
3616 (S/N: 7KM; 3NS)
Gas Engines:
G3508 (S/N: 4WD; 2JF; 9TG; 9AW)
G3512 (S/N: 4KC; 5JD; 7NJ; 6JW)
G3516 (S/N: 3RC; 8LD; 4EK; 5PN; 8PW)
Engine News SEBD9268, July 1998, "114-2410 Digital Pyrometer Battery Shelf Life Extender". Disregard this article. The article has been replaced by the following article:A modification to the 114-2410 Pyrometer has increased the shelf life of the digital pyrometer battery from 1.5 years to 5 years. The battery shelf life will decrease with an increase in ambient temperatures. This modification is effective with 114-2410 Pyrometer serial numbers 4018 and Up.A Field Modification Procedure has been developed in order to provide increased shelf life to earlier pyrometers. This field modification is adaptable to 114-2410 Pyrometer serial numbers 3001 through 4017. This field modification can be performed when the pyrometer batteries are changed.Field Modification Procedure
Loosen the four screws that go through the front keypad so that the device comes apart.
Remove the three batteries.
Remove the three small screws that fasten the circuit board to the front keypad plate. Do NOT LOSE these screws.
Find the location of the resistor "R11B" on the display side of the circuit board. "R11B" is on the lower left corner of the circuit board. Use small wire cutters to carefully cut the leads at each end of the resistor "R11B". Use care not to damage the resistor "R11C". Resistor "R11C" is located immediately above resistor "R11B".
Use the three small screws that were retained in Step 3 to install the circuit board on the keypad plate.
Install three new batteries. The following batteries are recommended: Duracell PX28L, Sanyo 2CR-1/3N and Altronic 601258. Take note of the battery polarity during installation.
Reassemble the pyrometer and install the four screws that were removed in Step 2.
Parts rim Caterpillar catalog:
950
5K4870
RIM ASSEM.
980B
980B
5K5488
RIM ASSEM.
814, 966C
814, 966C
4K7615
RIM ASSEM.
966C
966C
4K7029
RIM ASSEM.
966C
966C
5K4755
RIM ASSEM.
980B
980B
5K4869
RIM ASSEM.
980B
980B