RIM GP-DEMOUNTABLE 4V1911 - Caterpillar

Components of the Hoist System
Hydraulic Tank
Illustration 1 g03507112
The hydraulic tank is located at the front left-hand side of the machine, in front of the left front tire.Combination Valve
Illustration 2 g03507119
The combination control valve is located on the left frame rail behind the left front tire.Fan, Brake, and Hoist Pump
Illustration 3 g03507121
The pump for the fan, brake, and hoist system is located on the rear right-hand side of the pump drive housing.Steering and Hoist Pump
Illustration 4 g03507122
The pump for the steering and hoist system is located on the rear left-hand side of the pump drive housing.Hoist Control Valve
Illustration 5 g03507603
The hoist control valve is located on the left-hand side frame rail of the machine. Behind the left front fender.Hoist Raise Solenoid
Illustration 6 g03507620
The raise solenoid for the hoist system is the right-hand solenoid located on the hoist valve.Hoist Lower Solenoid
Illustration 7 g03507648
The lower solenoid for the hoist system is the left-hand solenoid located on the hoist valve.Hoist Cylinders
Illustration 8 g03507653
The hoist cylinders are located on both sides of the machine along the bed.Hoist Control Lever
Illustration 9 g03507661
The hoist control lever is the right lever of the two control levers on the control pad.Hoist Lever Position Sensor
Illustration 10 g03507665
The hoist level position sensor is located on the bottom of the hoist lever.Body Up Switch
Illustration 11 g03507658
The body up switch is located at the left rear of the machine bed, inside the left frame.Manual Lowering Valve
Illustration 12 g03507657
The manual lowering valve is located on the right-hand side of the machine, in the hitch area.