RIM ASSEM. 4Y5705 - Caterpillar

Diesel engine exhaust contains products of combustion which may cause personal injury.Always start and operate the engine in a well ventilated area, and, if in an enclosed area, vent the exhaust to the outside.
Personal injury or death can result from sudden machine movement.Sudden movement of the machine can cause injury to persons on or near the machine.To prevent injury or death, make sure that the area around the machine is clear of personnel and obstructions before operating the machine.
Personal injury can result from rotating and moving parts.Moving fan blades and moving parts will throw or cut any object or tool that falls or is pushed into them.Make sure no one is working on, underneath or close to an engine that is running. Make sure the area is free of personnel.
Table 1
Required Tools
Tool Part Number Description Qty
A 348-5430 Multi-Tool Gp 1 Note: Verify that the main relief valve is within specification prior to performing this procedure. Refer to Systems Operation, Testing and Adjusting,, " "Relief Valve (Main) Test"".Note: The machine may move during this test.
Park the machine on a smooth, horizontal surface.
Illustration 1 g03337283
Move propel lever (1) to the NEUTRAL position.
Monitor the hydraulic oil temperature with Tool (A). Operate the machine until the oil temperature reaches 43 5.6° C (110 10° F).
Depress brake pedal (2) to the full BRAKE position.
Slowly move "Propel" lever (1) to the full FORWARD position. The machine should not move.
Move "Propel" lever (1) back to the NEUTRAL position.
Slowly move "Propel" lever (1) to the full REVERSE position. The machine should not move.
If there is any machine movement during this test, repair or replace the brakes.