RIM GP-DEMOUNTABLE 5152492 - Caterpillar

Installation Procedure
Illustration 1 g01526227
Illustration 2 g01526528
Attach a suitable lifting device to generator (2). Install generator (2) and bolts (24). The weight of generator (2) is approximately 163 kg (359 lb).
Illustration 3 g01526222
Connect ground cable (23).
Illustration 4 g01526221
Install bracket (22) and the bolts.
Illustration 5 g01526220
Install jam nut (20).
Connect harness assembly (19) and harness assembly (21).
Illustration 6 g01526219
Connect harness assemblies (18) to generator (2).
Illustration 7 g01526218
Install cover (17) and bolts (16).
Illustration 8 g01526217
Install cover (15) and bolts (14).
Illustration 9 g01526215
Illustration 10 g01526216
Install guard (12), bolts (11), and bolts (13).
Illustration 11 g01526214
Install clamp (10) to hose assemblies (4).
Illustration 12 g01526213
Install clamp (9) to hose assembly (8).
Illustration 13 g01526212
Install clamp (5) to hose assemblies (6).
Install clamp (7) to hose assembly (8).
Illustration 14 g01526207
Install clamp (3) to hose assemblies (4).
Illustration 15 g01526229
Install belt (1) to generator (2) and the engine. Tighten the tension bolts to generator (2). End By:
Install the wheel (rear). Refer to Disassembly and Assembly, "Wheel (Rear) - Remove and Install".
Install the piston motor (hydraulic generator), if equipped. Refer to Disassembly and Assembly, "Piston Motor (Hydraulic Generator) - Install".
Install the air cleaner. Refer to Disassembly and Assembly, "Air Cleaner - Remove and Install".