RIM AS-TRACK 8E4575 - Caterpillar

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-3931 Anti-Seize Compound −
B 1P-0808 Multipurpose Grease −
Illustration 1 g02173629Note: Lubricate all of the O-ring seals with the lubricant that is being sealed.
Install O-ring seals (9).
Illustration 2 g01845473
Install spool (5). Tighten spool (5) to a torque of 50 5 N m (37 4 lb ft).
Install solenoid (6), washer (7), and nut (8). Tighten nut (8) to a torque of 20 2.5 N m (177 22 lb in) .
Illustration 3 g01871983
Fill Cavity (B) with Tooling (B). Cavity (B) is found on the valve housing.
Illustration 4 g02173623
Install actuator assembly (3) on valve housing (4).
Apply Tooling (A) to the threads on temperature sensor (1). Tighten temperature sensor (1) to a torque of 45 5 N m (33 4 lb ft). End By:
Install the exhaust control valve.