RIM AS 9C3982 - Caterpillar

Illustration 1 g00729789
Distance (A) from the end of the axle shaft to the clamp ... 1059 5 mm (41.2 0.2 inch) (1) Torque for 3T-2469 Magnetic Sensor ... 30 5 N m (22 4 lb ft)Note: Apply 5P-3413 Pipe Sealant to the threads of 3T-2469 Magnetic Sensor . (2) Torque for 8H-5772 Bolts ... 40 65 N m (546 48 lb ft)Note: Apply 4C-5591 Anti-Seize Compound to the washers and to the threads of 8H-5772 Bolts . (3) Torque for 5T-8041 Adapter ... 55 7 N m (40 5 lb ft)Note: Apply 154-9731 Thread Lock Compound to the threads of 5T-8041 Adapter . (4) Torque for 1T-0284 Bolts ... 30 5 N m (22 4 lb ft)Note: Apply 154-9731 Thread Lock Compound to the threads of 1T-0284 Bolts .Note: Stake the top edge of the counterbore in order to retain 1T-0284 Bolts .Adjustment Procedure for the Adapter to the Gear
Illustration 2 g00729215
(3) 5T-8041 Adapter (5) Shims
Measure the distance from the machined counterbore surface to the gear tooth. This distance is distance (B) .
Determine the thickness of 5T-8041 Adapter (3). This thickness is thickness (C) .
Add distance (B) to thickness (C). Subtract this total from 167.36 0.08 mm (6.589 0.003 inch).
Install shim pack (5) that is equal to the difference.The shims that are available to achieve the correct dimension 5T-8042 Shim ... 0.16 mm (0.0063 inch) 5T-8168 Shim ... 0.05 mm (0.0020 inch) 5T-8169 Shim ... 0.80 mm (0.0315 inch)