RIM-TRACK 9M3818 - Caterpillar

Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
When the autolube is in "Not Installed" status in configuration for autolube Installation, all the fields related to autolube will be hidden in the display for the machines with 424-4847 Machine Software Gp and 424-5052 Implement Software Gp . This will not allow displaying autolube fields or changing autolube settings through the display.For machines with 425-9561 Monitor Software Gp , the "Autolube Mode" under "Settings" screen displays incorrect value. The current setting for the autolube mode displaying one level lower than the actual level for the pump.Note: The setting selection screen and status screens display only the correct values.Solution
If autolube is installed on the machine, make sure to set to "Installed".