RING SET 0005836 - Caterpillar

Remove seal (49) .
Illustration 23 g01066352
Illustration 24 g01085196
Remove check valve (53). Remove O-ring seals (54) and (54A) from check valve (53) .
Loosen allen head screws (51) and remove cap (52) and the valve spool assembly together from the manifold.
Illustration 25 g01066356
Illustration 26 g01085208
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove allen head screws (51), plate (55), cap (52), and valve spool assembly (56) .
Remove sleeve (61) from valve spool assembly (56). Remove O-ring seal (57) and O-ring seal (60) from sleeve (61) .
Use Tooling (A) to remove screw (62). Remove detent kit (59) and spring kit (58) .
Illustration 27 g01066415
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove tilt control valve (2) from the rods.
Disassemble tilt control valve (2), as follows:
Illustration 28 g01066422
Remove spring (66), valve (67), and O-ring seal (68) .
Illustration 29 g01066440
Remove allen head screws (69) and plate (70) .
Illustration 30 g01085275
Remove seal (71) .
Illustration 31 g01066481
Remove allen head screws (73) and cap (74) .
Illustration 32 g01066493
Remove valve spool assembly (75) .
For disassembly of spool assembly (75), perform Step 4.j through Step 4.l.
Illustration 33 g01066577
Illustration 34 g01066605
Remove studs (76) from manifold (1) .
Remove O-ring seal (78) .
Remove relief valve (77) from manifold (1) .
Remove O-ring seal (79) and O-ring seal (80) .