RING 0990667 - Caterpillar

0990667 RING Caterpillar parts E110B, E120B, E70B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA0990667
099-0667
0990667

Weight: 0.01 pounds 0 kg.

Buy RING 0990667 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

Cutter King # 099-0667 Titanium Chain Pre-Cut Loop 66 DL

$33.99

03 Oct 2024

US: MRMOWERPARTS

Cutter King # 099-0667 Titanium Chain Pre-Cut Loop 66 DL
Cutter King 3/8", .050, Chisel Standard || 3/8", .050, Chisel Standard || 0 || 0

$51.44

03 May 2021
0.56[0.25] Pounds
US: RAParts Inc.

099-0667 Titanium Chain Pre-Cut Loop 66 DL
Reliable Aftermarket Parts Our Name Says It All

Cutter Force # 099-0667 Titanium Chain Pre-Cut Loop 66 DL

$35.99

22 Jul 2020

-: -

Cutter Force # 099-0667 Titanium Chain Pre-Cut Loop 66 DL
3/8", .050, Chisel Standard || 3/8", .050, Chisel Standard || 0 || 0

Number on catalog scheme: 34

For full view, you need register

Compatible equipment models: 0990667:

EXCAVATOR E110B E120B E70B Caterpillar

Information:

Illustration 10 g00869464
Use a suitable lifting device to install carrier assembly (20) . The weight of carrier assembly (20) is approximately 59 kg (130 lb).
Illustration 11 g00869460
Install retaining ring (19) .
Illustration 12 g00869406
Install spacer (17) in carrier assembly (18) .
Illustration 13 g00869390
Make sure that the mating surfaces of ring gear (15) and swing drive housing (16) are thoroughly clean.
Apply Tooling (G) to the face of swing drive housing (16) and the face of ring gear (15) .
Use Tooling (B) and a suitable lifting device to install ring gear (15) in swing drive housing (16) . The weight of ring gear (15) is approximately 68 kg (150 lb).
Illustration 14 g00869383
Install retaining ring (14) into the sun gear.
Illustration 15 g00869377
Install sun gear (13) in carrier assembly (4) . Install upper retaining ring (12) .
Assemble carrier assembly (4) .
Illustration 16 g00869315
Apply clean oil on bearing (10) . Install bearing (10) in planetary gear (9) .
Install thrust washer (8) on one side of planetary gear (9) .
Install thrust washer (11) on the other side of planetary gear (9) .
Use a deburring tool to remove the metal burr from the openings in the carrier.
Install planetary gear (9) and the thrust washers in carrier assembly (4) .
Illustration 17 g00869309
Install planetary shaft (7) through the gear assembly into the carrier assembly. Make sure that the spring pin hole in the planetary shaft is in alignment with the spring pin hole in the carrier.
Illustration 18 g00703700
Drive spring pin (6) into shaft (7) . Orient the split in spring pin (6) vertically to the carrier. Align the split in the spring pin to the top or the bottom. Make a stake mark on each side of the spring pin hole in the carrier. Each stake mark should be approximately 2.25 0.75 mm (0.09 0.03 inch) from the outside diameter of the spring pin hole.
Repeat Steps 24.a through 24.g in order to install the other three planetary gears in the carrier.
Illustration 19 g00869294
Use two people to install carrier assembly (4) in the ring gear. The weight of carrier assembly (4) is approximately 34 kg (75 lb).
Install spacer (5) in carrier assembly (4) .
Illustration 20 g00869281
Install sun gear (3) in carrier assembly (4) .
Illustration 21 g00869266
Make sure that the mating surfaces of the ring gear and cover (2) are thoroughly clean.
Apply Tooling (G) on the flange surface of the ring gear and cover (2) .
Install cover (2) and bolts (1) .End By: Install the swing drive. Refer to Disassembly and Assembly, "Swing Drive - Install".