RING 1104755 - Caterpillar

Illustration 1 g03363156
Right side view of engine
Table 1
Specification for 352-8028 Oil Pan Gp
Item Qty Part Specification Description
1 2 319-6234 Plug As Torque to 90 15 N m (66 11 lb ft).
2 2 9X-6451 Drain Plug Torque to 70 15 N m (52 11 lb ft).
Illustration 2 g03376200
Tightening procedure
Illustration 3 g03376158
Retightening procedure
Table 2
Item Qty Part Specification Description
3 40 2P-3205 Bolt Use the following procedure during assembly of engine oil pan:
The sealing surfaces of the oil pan shall be free of oil, debris, gasket material, or any other sealant.
The oil pan must be assembled and tightened to the cylinder block within10 minutes of applying sealant.
1. Apply 3 to 5 mm (0.1 0.2 inch) of ultra blue Loctite 587 to the following locations:
Connecting joint of the front housing and the front of the cylinder block.
Connecting joint of the flywheel housing and the rear of the cylinder block.
2. Tighten bolt 1 through bolt 40 in the numerical sequence to 40 5 N m (30 4 lb ft) as shown in Illustration 2.
3. Again, tighten bolt 1 through bolt 40 in the numerical sequence to 47 5 N m (35 4 lb ft) as shown in Illustration 3.