RING-RETAINING 1211258 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3938 Link Bracket 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Drain the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change". Drain the cooling system until the level of the coolant is below the exhaust manifolds.
Illustration 1 g00602193
Disconnect tube assembly (1) from the water temperature regulator housing.
Illustration 2 g00602196
Disconnect tube assemblies (2) from the water temperature regulator housing.
Illustration 3 g00602197
Typical example
Attach Tooling (A) and a suitable lifting device to water temperature regulator housing (4). Remove bolts (3). Remove water temperature regulator housing (4).
Illustration 4 g06123214
Remove water temperature regulators (7) and gasket (5) from water temperature regulator housing (4). Remove seals (6).seals for water temperature regulators (5). Obtain new parts for assembly, if necessary.
Illustration 5 g06123215
Remove vent valve (8).