1270116 RING-TORIC Caterpillar parts
D10N, D10R, D9R
Rating:
Alternative (cross code) number:
CA1270116
127-0116
1270116
CA1270116
127-0116
1270116
Weight: 0.05 pounds 0 kg.
Information:
CROSS SECTION DIAMETER
12.7
mm
ID
317.13
mm
MATERIAL
Hydrogenated Nitrile Rubber (HNBR) 60 Duro
OD
0
mm
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$49.00
07 Dec 2022
4.0[1.80] Pounds
US: Pit_Stop_Auto
Pit Stop Auto Group A/C Manifold Hose Assembly - 1270116
Pit Stop Auto Group
Pit Stop Auto Group
$67.03
18 Aug 2022
Amazon.com
LeadPro Armor All Heavy Duty Premium Waterproof All-Weather Car Cover for Max Protection from Sun Rain Wind & Snow for Car or Sedan upto 203" in Length; Indoor & Outdoor Covers; See Chart for Your Car
Armor All Easy Fit Guide: Fits all Sedan Cars up to 203 inch in Length; See chart for the correct size. Car Covers Vehicle Example: Camry Accord Civic Elantra Sonata Legacy WRX Corolla Model3 M3 M4 M5 Cruze Corvette Malibu Focus Fusion Mustang Optima Jetta Passat || All-Weather Premium Care: Our heavy duty cover is designed to provide maximum weather protection from rain, snow, dust, tree sap, bird droppings and more; Assembled using ultrasonic welding technology which provides the most secure and strongest design || Heavy Duty Material with Max Protection provides: 100% waterproof protection, Sun protection from damaging UV rays, Allows cover to breath preventing moisture build-up under the cover; Anti-scratch soft cotton layer protects vehicle finish || High Wind Protection System: Our cover is designed with 6 points of security that will keep your cover securely on the vehicle during strong high winds; Can be easily adjusted to create a semi-custom fit your vehicle || Renowned Brand: As a leading manufacturer of appearance products for over 50 years, Armor All is one of the most well-known and trusted names in automotive care
Armor All Easy Fit Guide: Fits all Sedan Cars up to 203 inch in Length; See chart for the correct size. Car Covers Vehicle Example: Camry Accord Civic Elantra Sonata Legacy WRX Corolla Model3 M3 M4 M5 Cruze Corvette Malibu Focus Fusion Mustang Optima Jetta Passat || All-Weather Premium Care: Our heavy duty cover is designed to provide maximum weather protection from rain, snow, dust, tree sap, bird droppings and more; Assembled using ultrasonic welding technology which provides the most secure and strongest design || Heavy Duty Material with Max Protection provides: 100% waterproof protection, Sun protection from damaging UV rays, Allows cover to breath preventing moisture build-up under the cover; Anti-scratch soft cotton layer protects vehicle finish || High Wind Protection System: Our cover is designed with 6 points of security that will keep your cover securely on the vehicle during strong high winds; Can be easily adjusted to create a semi-custom fit your vehicle || Renowned Brand: As a leading manufacturer of appearance products for over 50 years, Armor All is one of the most well-known and trusted names in automotive care
$52.00
13 Jun 2022
4.0[1.80] Pounds
US: Pit_Stop_Auto
New A/C Manifold Hose Assembly for Trailblazer Envoy Trailblazer EXT Envoy XL Ra
Pit Stop Auto Group See Description For Full List of Vehicles This Item Fits || A/C Manifold Hose Assembly. || HVAC --> Hoses and Pipes || A/C Manifold Hose Assembly
Pit Stop Auto Group See Description For Full List of Vehicles This Item Fits || A/C Manifold Hose Assembly. || HVAC --> Hoses and Pipes || A/C Manifold Hose Assembly
Number on catalog scheme:
67
For full view, you need register
Information:
Removal Procedure
Start By:
If the engine is equipped with a fan, remove the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
Remove the water pump. Refer to Disassembly and Assembly, "Water Pump - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: In order to remove the front cover, it is not necessary to remove the crankshaft pulley or the alternator.
Illustration 1 g01258462
Typical example
Remove bolts (3), (4) and (5). Identify the positions of the different bolts.
Remove front cover (1) from the front housing.
Remove joint (2) from front cover (1). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Bolt
(M8 by 80 mm) 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01343967
Typical example
Thoroughly clean the mating surface of the front housing.
If the original front cover is installed, follow Steps 2.a and 2.b in order to install the joint.
Thoroughly clean the front cover.
Install a new joint (2) to front cover (1). Engage locators (Y) into the holes in the front cover.
Install Tooling (A) into holes (X) in the front housing.
Use Tooling (A) in order to position the front cover assembly onto the front housing.
Install bolts (3), (4) and (5) finger tight. Ensure that the different bolts are installed in the correct positions.
Loosely install the water pump assembly and remove Tooling (A). Refer to Disassembly and Assembly, "Water Pump - Install" for the correct procedure.
Tighten bolts (3), (4) and (5) to a torque of 22 N m (16 lb ft).
Tighten the bolts for the water pump to a torque of 22 N m (16 lb ft). End By:
If the engine is equipped with a fan, install the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
Start By:
If the engine is equipped with a fan, remove the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
Remove the water pump. Refer to Disassembly and Assembly, "Water Pump - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: In order to remove the front cover, it is not necessary to remove the crankshaft pulley or the alternator.
Illustration 1 g01258462
Typical example
Remove bolts (3), (4) and (5). Identify the positions of the different bolts.
Remove front cover (1) from the front housing.
Remove joint (2) from front cover (1). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Bolt
(M8 by 80 mm) 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01343967
Typical example
Thoroughly clean the mating surface of the front housing.
If the original front cover is installed, follow Steps 2.a and 2.b in order to install the joint.
Thoroughly clean the front cover.
Install a new joint (2) to front cover (1). Engage locators (Y) into the holes in the front cover.
Install Tooling (A) into holes (X) in the front housing.
Use Tooling (A) in order to position the front cover assembly onto the front housing.
Install bolts (3), (4) and (5) finger tight. Ensure that the different bolts are installed in the correct positions.
Loosely install the water pump assembly and remove Tooling (A). Refer to Disassembly and Assembly, "Water Pump - Install" for the correct procedure.
Tighten bolts (3), (4) and (5) to a torque of 22 N m (16 lb ft).
Tighten the bolts for the water pump to a torque of 22 N m (16 lb ft). End By:
If the engine is equipped with a fan, install the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
Caterpillar parts catalog:
Parts ring Caterpillar catalog:
966D, D10N, D10R
854G, 990 II, D10N, D10R, D10T, D9L
769C, 769D, 771C, 771D, D9R, D9T
120H, 120H ES, 120H NA, 120K, 120K 2, 135H, 135H NA, D10R, D10T, D10T2, D11N, D11R, D250D, D250E, D250E II, D300E, D300E II, D400E II
793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, D10, D10N, D10R, D11N, D11R, D11T
5110B, D10N, D10R, D10T, D10T2
5110B, D10N, D10R, D10T, D10T2
518, 518C, 844, 844H, 844K, 854G, 854K, D10N, D11N, D11R, D11T, D4HTSK II, D4HTSK III, D5HTSK II, D8R, D8R II, D8T, D9N, D9R, D9T
D8L, D9N, D9R, D9T
D10N, D10R, D10T, D10T2, D9L
D10, D10N, D10R
D10R, D10T, D10T2
D10, D10N, D10R
9W6854
RING-RETAINING
D10N, D10R, D10T, D10T2
D10N, D10R, D10T, D10T2
D10N, D10R, D10T, D10T2, D9L
D10N, D10R, D10T, D10T2
6T6566
RING-RETAINING
D10N, D10R, D10T, D10T2
D10N, D10R, D10T, D10T2
D11R, D11T
D10, D11N, D11R, D11T
D10, D11N, D11R, D11T
2462942
RING
D11R, D11T
D11R, D11T
2462941
RING
D11R, D11T
D11R, D11T
D10N, D10R, D10T