1336716 RING-BACKUP Caterpillar parts
315B, 315B L, 315C, 315D L, 317B LN, 318B
Rating:
Alternative (cross code) number:
CA1336716
133-6716
1336716
CA1336716
133-6716
1336716
Weight: 0.01 pounds 0 kg.
Information:
AXIAL WIDTH
1.25
mm
ID
100.2
mm
MATERIAL
Nylon
OD
105
mm
RADIAL HEIGHT
2.4
mm
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$10.22
09 Jun 2022
US: Florida-Parts-Z
1336716 - Ring-Back UP for Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$8.77
15 Feb 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
Caterpillar Ring Backup 1336716 New
$9.45
09 Jun 2022
0.13[0.06] Pounds
US: ProperBuy
1336716 Ring Backup Fits Caterpillar 315B L 315C 315D L 317B L 317B LN
TCP Warranty
TCP Warranty
Number on catalog scheme:
8
For full view, you need register
Information:
The scanner has six setpoints that can be programmed to help provide protection from abnormal exhaust temperatures.The setpoints can be programmed within the temperature range of the scanner. The temperature range of the scanner is 0 to 850 °C (32 to 1562 °F).For information on the effects of the setpoints on the scanner, refer to Systems Operation, "Alarm Description".
Illustration 1 g00764733
Typical examples of the displays for the setpointsThe following definitions explain the six setpoints:"SET CYL DEV" (1) - Deviation of an exhaust port temperature from the average temperature of all of the cylinders"SET CYL HI 1" (2) - First setpoint for high cylinder exhaust temperature"SET CYL HI 2" (3) - Second setpoint for high cylinder exhaust temperature"SET TO HI 1" (4) - First setpoint for high turbocharger outlet temperature (exhaust)"SET TO HI 2" (5) - Second setpoint for high turbocharger outlet temperature (exhaust)"SET TI HI" (6) - High turbocharger exhaust inlet temperature
"SETPTS" key Press the "SETPTS" key one time in order to view the first setpoint. The description is displayed on the first line of the screen. The value of the setpoint is displayed on the second line. Press the key again in order to view the second setpoint, etc.If a setpoint is displayed and no key is pressed for 15 seconds, the display will return to the normal mode.Use the following procedure to change a setpoint:
Up Arrow and Down Arrow key
"ESC" key
"ENTER/ACK" key
Press the "SETPTS" key until the desired setpoint is displayed.
Press the up arrow key or the down arrow key in order to increase the value or decrease the value.Note: To discard the new value, press the "ESC" key without pressing the "ENTER/ACK" key. The "ESC" key returns the display of the scanner to the normal screen.
Press the "ENTER/ACK" key in order to save the new value.
"RESET" key
"ENTER/ACK" key The setpoints can also be turned off. To turn OFF a setpoint, display the setpoint and press the "RESET" and "ENTER/ACK" keys simultaneously. If a setpoint is turned OFF and the setpoint is exceeded, the scanner will not react.To turn ON the setpoint again, display the setpoint and press the "RESET" and "ENTER/ACK" keys again. The last saved value will be displayed. Keep the setpoints ON during normal engine operation in order to help provide protection from abnormal exhaust temperatures.The setpoints for high exhaust temperatures will be different for different applications. To determine a suitable setpoint, calculate the average range for the particular parameter during normal engine operation. Adjust the setpoint to a temperature that is slightly higher than the normal operating temperature.To avoid nuisance alarms, select a temperature that will not normally be reached during engine operation. However, be sure to adjust the setpoint so that the scanner can react before the engine can be damaged by high exhaust temperatures.
Illustration 1 g00764733
Typical examples of the displays for the setpointsThe following definitions explain the six setpoints:"SET CYL DEV" (1) - Deviation of an exhaust port temperature from the average temperature of all of the cylinders"SET CYL HI 1" (2) - First setpoint for high cylinder exhaust temperature"SET CYL HI 2" (3) - Second setpoint for high cylinder exhaust temperature"SET TO HI 1" (4) - First setpoint for high turbocharger outlet temperature (exhaust)"SET TO HI 2" (5) - Second setpoint for high turbocharger outlet temperature (exhaust)"SET TI HI" (6) - High turbocharger exhaust inlet temperature
"SETPTS" key Press the "SETPTS" key one time in order to view the first setpoint. The description is displayed on the first line of the screen. The value of the setpoint is displayed on the second line. Press the key again in order to view the second setpoint, etc.If a setpoint is displayed and no key is pressed for 15 seconds, the display will return to the normal mode.Use the following procedure to change a setpoint:
Up Arrow and Down Arrow key
"ESC" key
"ENTER/ACK" key
Press the "SETPTS" key until the desired setpoint is displayed.
Press the up arrow key or the down arrow key in order to increase the value or decrease the value.Note: To discard the new value, press the "ESC" key without pressing the "ENTER/ACK" key. The "ESC" key returns the display of the scanner to the normal screen.
Press the "ENTER/ACK" key in order to save the new value.
"RESET" key
"ENTER/ACK" key The setpoints can also be turned off. To turn OFF a setpoint, display the setpoint and press the "RESET" and "ENTER/ACK" keys simultaneously. If a setpoint is turned OFF and the setpoint is exceeded, the scanner will not react.To turn ON the setpoint again, display the setpoint and press the "RESET" and "ENTER/ACK" keys again. The last saved value will be displayed. Keep the setpoints ON during normal engine operation in order to help provide protection from abnormal exhaust temperatures.The setpoints for high exhaust temperatures will be different for different applications. To determine a suitable setpoint, calculate the average range for the particular parameter during normal engine operation. Adjust the setpoint to a temperature that is slightly higher than the normal operating temperature.To avoid nuisance alarms, select a temperature that will not normally be reached during engine operation. However, be sure to adjust the setpoint so that the scanner can react before the engine can be damaged by high exhaust temperatures.
Caterpillar parts catalog:
Parts ring Caterpillar catalog:
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, ...
1090, 1190, 1190T, 1290T, 1390, 215C, 215D, 2290, 2390, 2391, 2491, 2590, 311, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312E, 312E L, 313B, 313D, 313D2, 314C, 314D CR, 314D...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2470C, 2491, 2570C, 2590, 2670C, 303.5C, 303.5D, 303.5E, 303C CR, 304C CR, 304D CR, 304E, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 311C, 311D LRR, 311F...
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 24H, 24M, 307B, 312B L, 312C, 315B L, 315C, 317B LN, 318B, 320B, 320C, 322B LN...
301.5, 301.6C, 302.5, 302.5C, 303, 304.5, 305.5, 306, 311, 311B, 312, 312B, 312B L, 315, 315B, 315B FM L, 315B L, 317, 317B LN, 318B, 318C, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B U, 32...
307C, 308C, 308D, 311B, 311C, 311D LRR, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312E, 312E L, 313B, 313D, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315, 315B, 315B L, 315C, 315D L, 317B LN, 318B, ...
1390, 2590, 311D LRR, 312B L, 312C, 312D, 312E, 314D LCR, 314E LCR, 315B L, 315C, 315D L, 316E L, 317B LN, 318E L, 320 L, 320B, 320C, 320D, 320D FM, 320D2, 320D2 L, 322 FM L, 322 LN, 322B L, 322B LN, ...
315C, 315D L, 316E L, 318D L, 318D2 L, 318E L
315D L, 318E L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D2 ...
315, 315B, 315B L, 315C, 315D L, 316E L, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, M313C, M313D, M315D 2, M318C, M318C MH, M318D, M318D MH, M322D, M322D MH
1688242
RING
312B L, 312C, 312D, 312E, 315B L, 315C, 315D L, 316E L, 317B LN, 318B, 318C, 319C, 319D, 319D LN, 320B, 320C, 320E, 320E L, 320E LN, 322B LN, 322C, 323D L, 323D LN, 323E L, 324D, 324D L, 324D LN, 325B...
312B L, 312C, 312D, 312E, 315B L, 315C, 315D L, 316E L, 317B LN, 318B, 318C, 319C, 319D, 319D LN, 320B, 320C, 320E, 320E L, 320E LN, 322B LN, 322C, 323D L, 323D LN, 323E L, 324D, 324D L, 324D LN, 325B...
1656007
RING
312B L, 312C, 312D, 312E, 315B L, 315C, 315D L, 316E L, 317B LN, 318B, 318C, 319C, 319D, 319D LN, 320B, 320C, 320E, 320E L, 320E LN, 322B LN, 322C, 323D L, 323D LN, 323E L, 324D, 324D L, 324D LN, 325B...
312B L, 312C, 312D, 312E, 315B L, 315C, 315D L, 316E L, 317B LN, 318B, 318C, 319C, 319D, 319D LN, 320B, 320C, 320E, 320E L, 320E LN, 322B LN, 322C, 323D L, 323D LN, 323E L, 324D, 324D L, 324D LN, 325B...
1850458
RING
307C, 308C, 311B, 312B, 312B L, 315B L, 317B LN, 318B
307C, 308C, 311B, 312B, 312B L, 315B L, 317B LN, 318B
2134208
RING-LOCK
312B L, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 770G, 770G OEM, 772G, 772G OEM, 966K, 966M, 966M XE, 972K, 972M, 972M XE, 980G, 980H, 980K, 980K HLG, 980M, 982M, AP1000E, AP1055E, BG10...
312B L, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 770G, 770G OEM, 772G, 772G OEM, 966K, 966M, 966M XE, 972K, 972M, 972M XE, 980G, 980H, 980K, 980K HLG, 980M, 982M, AP1000E, AP1055E, BG10...
1733515
RING-RETAINING
2384C, 2484C, 311C, 311D LRR, 311F LRR, 312B L, 312C, 312C L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315B L, 315C, 317B LN, 318B, 318C, 319C, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM R...
2384C, 2484C, 311C, 311D LRR, 311F LRR, 312B L, 312C, 312C L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315B L, 315C, 317B LN, 318B, 318C, 319C, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM R...
1184779
RING
305, 315, 315B, 315C, 317B LN, 318B, 933, 933C, D3C III, D3G, D4C III, D4G, D5C III, D5G
305, 315, 315B, 315C, 317B LN, 318B, 933, 933C, D3C III, D3G, D4C III, D4G, D5C III, D5G
1184763
RING-SNAP
315, 315B, 315C, 317B LN, 318B, 933, 933C, 939C, D3C III, D4C III, D5C III, D5G
315, 315B, 315C, 317B LN, 318B, 933, 933C, 939C, D3C III, D4C III, D5C III, D5G
2128644
RING
317B LN, 318B
317B LN, 318B
1582462
RING-RETAINING
315B L
315B L
315, 315B, 315B L, 315C, 315D L, 316E L, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN
315B, 315B L, 315C, 315D L, 316E L, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320D, 320D FM, 320D FM RR, 320D2, 320D2 L, 320E, 320E L, 320E LN, 320E...