AVSPARE.COM
parts catalog

RING-WEAR 1400186 - Caterpillar



1400186 RING-WEAR Caterpillar parts RING
Rating:
21
Alternative (cross code) number:
CA1400186
140-0186
1400186
Caterpillar 1400186 RING-WEAR
Weight: 0.05 pounds 0 kg.
Information:
AXIAL WIDTH  8  mm
ID  0  mm
MATERIAL  PTFE 
OD  120  mm
THICKNESS  4  mm
TYPE  PISTON 

Buy RING-WEAR 1400186 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

1. Remove the oil from the hydraulic tank.2. Put identification on the oil lines as to their location on the valve. Disconnect oil lines (1) and (4) from the valve.3. Remove bolts (3). Remove cooler relief valve (2).Install Cooler Relief Valve
1. Put cooler relief valve (2) in position on the frame. Install the bolts that hold it.2. Connect oil lines (1) and (3) to their correct location on the valve.3. Fill the hydraulic tank with oil to its correct level.Disassemble Cooler Relief Valve
START BY:a) remove cooler relief valve 1. Remove plug (3) from body (1). Remove O-ring seal from the plug.2. Remove retainer (5), spring (2) and valve (4) from body (1).Assemble Cooler Relief Valve
1. Put valve (5) in position in body (3).2. Put spring (4) and retainer (2) in position on the valve.3. Install new O-ring seal on the plug. Install plug (1) in body (3). Tighten plug (1) to a torque of 55 5 lb.ft. (75 7 N m).END BY:a) install cooler relief valve


Parts ring Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.