AVSPARE.COM
parts catalog

RING-WEAR 1400187 - Caterpillar



1400187 RING-WEAR Caterpillar parts RING
Rating:
26
Alternative (cross code) number:
CA1400187
140-0187
1400187
Caterpillar 1400187 RING-WEAR
Weight: 0.03 pounds 0 kg.
Information:
AXIAL WIDTH  7.75  mm
ID  0  mm
MATERIAL  PTFE 
OD  125  mm
THICKNESS  2.5  mm
TYPE  PISTON 

Buy RING-WEAR 1400187 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

24. Remove the covers and shims from each side of the body. Keep the shims with their respective cover. Remove the swashplate from the body.25. Put pistons (19) in position on the plate in the swashplate in their correct sequence. Install retraction plate (20) over the pistons. Later model pumps use self-locking bolts and washers to hold the shims and retraction bearings in position. Use the old bolts in Step 26. Install new bolts after clearance has been checked in Step 3. Tighten self-locking bolts to a torque of 111 9 lb.in. (12.5 1.0 N m).26. Put the original amount of shims and retraction bearings (21) in position on the swashplate. Install the locks and bolts (22). Tighten bolts (22) to a torque of 75 10 lb.in. (8.4 1 N m).27. Measure the clearance between the piston slippers and plate (8) with


Parts ring Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.