parts catalog

RING-WEAR 1400248 - Caterpillar

1400248 RING-WEAR Caterpillar parts RING
Alternative (cross code) number:
Caterpillar 1400248 RING-WEAR
Weight: 0.09 pounds 0 kg.
AXIAL WIDTH  14.7  mm
ID  0  mm
OD  180  mm
THICKNESS  2.5  mm

Buy RING-WEAR 1400248 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


1. Remove the oil from the filter. Remove the housing from the base. Remove O-ring seal (2) from the filter base.2. Remove nut (4), terminal (3), washer (6) and insulator (5) from the pin. Remove pin (1) from the filter base. 3. Remove O-ring seal, insulator (10), washer (8), valve (9) and spring (7) from the pin.Assemble Transmission Oil Filter Base (Earlier)
1. Install spring (6), valve (7), washer, insulator (1) and the O-ring seal on pin (5).2. Put the pin into position in the filter base. Push on the end of the pin to put the spring in compression.3. Install insulator (2), washer, terminal (3), and nut (4) on the pin.4. Install the O-ring seal in the filter base. Install the housing on the base.END BY:a) install transmission oil filter base

Parts ring Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.