RING 1402011 - Caterpillar

Caterpillar Products All MachinesIntroduction
Avoid prolonged skin contact with isopropyl alcohol. Avoid breathing the vapors in enclosed areas without adequate ventilation and do not smoke.Isopropyl alcohol is flammable. Do not use near open flame, welding operations, or around heated surfaces exceeding 482°C (900°F).
Personal injury or death can result from improper troubleshooting and repair procedures.The following troubleshooting and repair procedures should only be performed by qualified personnel familiar with this equipment.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
This information lists the procedures that are required in order to replace the bonded glass in the cab of Caterpillar machines.Do not perform any procedure that is outlined in this publication, or order any parts until you understand this information.Reference: , PEGJ0075, 03, January 2010, "CAT LOCTITE GLOBAL CROSSOVER LIST"Reference: To procure Sika Products locally, go to www.sika.com for distributors for your region.Tools, Parts, and Adhesives that are Required
Table 1
Required Tools and Parts
Item Part Number Description
127-6421 Window Tool Kit(1)
1 121-9777 Wire
2 4C-4870 Utility Knife
3 121-9778 Cut Out Knife
4 121-9782 Suction Cup Holder
5 121-9781 Caulking Gun
6 1U-6707 Tape
7 110-7524 Button
8 246-5181 Glove
9 121-9779 Blade
10 121-9780 Wire Handles
11 127-6383 Brush (Sponge)
13 7X-2634 Seal
14 289-9584 Seal
(1) This kit contains items (1) through item (11)
Table 2
Adhesives and Cleaners/Primers
Part Number Description
Loctite 595 CL RTV 300ML Silicone Adhesive Sealant
Clear(1)
Loctite RTV Silicon Clear 300ML Silicone Adhesive Sealant
Clear(1)
121-3908 Sika 255 FC Adhesive
Black
175-2935 Sika Tack-Plus Booster Adhesive
Black
175-2934 Sika Activator Primer
121-3911 Sika 206 G + P Primer
- Sika 209 D
- Sika Activator UH-2 LUM
- Sika 295 UV
222-3117 Cleaner
189-6296 Cleaner (EAME Only)
(1) Loctite 595 CL RTV 300ML can be used in place of Loctite RTV Silicon Clear 300ML if the temperature is below 0 °C (32 °F). Loctite 595 CL RTV 300ML is for glass to glass joints. Adhesive will be fully dry in 24 hours.Loctite 595 CL RTV 300ML is for glass to glass joints. Adhesive will be fully dry in 24 hours.Loctite RTV Silicon Clear 300ML can only be used if the temperature is above 0 °C (32 °F).Sika 255 FC Adhesive (black), should be used when a slow cure time is needed. Adhesive will be fully dry in 4 to 6 hours at 24 °C (75 °F) with 50% humidity to 75% humidity. Increased temperature and humidity will greatly decrease adhesive dry time.Sika Tack-Plus Booster Adhesive (black), should be used when a faster cure time is required. Adhesive will be fully dry in 1 to 2 hours at 24 °C (75 °F) with 50% humidity to 75% humidity. Increased temperature and humidity will greatly decrease adhesive dry time.Sika Activator Primer must be used with Sika Tack-Plus Booster Adhesive.Sika 206 G & P