1410711 RING-WEAR Caterpillar parts
420D, 420E, 428D, 428E, 430D, 430E, 432D, 432E, 434E, 438D, 442D, 442E, 906, 966M, 966M XE, 972M, 972M XE
Rating:
Alternative (cross code) number:
CA1410711
141-0711
1410711
CA1410711
141-0711
1410711
Weight: 0.08 pounds 0 kg.
Information:
AXIAL WIDTH
29.74
mm
ID
0
mm
MATERIAL
Nylon
OD
85
mm
THICKNESS
3.2
mm
TYPE
PISTON
BACKHOE LOADER, WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Buyers Products Company Replacement #40 80-Link Roller Chain for SaltDogg Spreaders (1 EA)
Buyers Products Company Buyers Product Company
Buyers Products Company Buyers Product Company
Buyers Products 1410711 Replacement #40 80 Link Spinner Roller Chain For Salt Dogg® 1400400 And 1400450 Spreaders
Buyers Products Company Replacement #40 80-Link Roller Chain for SaltDogg 1400400 & 1400450 Spreaders
Buyers Products Company Replacement #40 80-Link Roller Chain for SaltDogg 1400400 & 1400450 Spreaders
This part in 2 request:
Show.
This information for suppliers only!
2018-09-04
2018-09-04
Number on catalog scheme:
9
For full view, you need register
Compatible equipment models: 1410711:
Information:
Remove & Install Fuel Injection Nozzles & Adapters
Start By:a. remove valve covers FLUID SPILLAGE CONTAINMENTCare must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to "Tools And Shop Product Guide", NENG2500, for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose fluids according to local regulations and mandates. 1. Use Tooling (A), and disconnect fuel line (1) at each end. Remove the fuel line from the engine. 2. Use Tool (B), and remove retainer (2) from the adapter.3. Remove the fuel injection nozzles with Tooling (C) as follows:a. Install the 6V-6983 Adapterand the 8T-3199 Screwinto nozzle assembly (3).b. Install the 8T-3198 Tubeover the 8T-3199 Screw.c. Use the 1B-4206 Nuton the 8T-3199 Screw.d. Use the 1B-4206 Nuton the 8T-3199 Screwto pull the fuel injection nozzle from the adapter.4. Remove compression seal (4) and carbon dam seal (8) from fuel injection nozzle (3).5. Use Tool (D), and remove adapter (6) from the cylinder head.6. Remove gasket (7) and seal (5) from adapter (6). The following steps are for installation of the fuel injection nozzles and adapters.7. Use Tool (E) to clean the bore in adapter (6). Use an open end wrench or tap driver to turn Tool (E).8. Inspect seal (5) for damage or wear. Replace the seal if necessary.9. Put washer (7) and seal (5) in position on adapter (6).10. Put liquid soap in the bores of the cylinder head and on seals (5) in the adapters.11. Put 5P-3931 Anti-Seize Compoundon the threads of adapter (6), and install the adapter in the cylinder head assembly.12. Use Tool (D), and tighten the adapter to a torque of 205 14 N.m (154 10 lb ft).
Make sure the correct compression seal washer (4) is used when the nozzle assembly is installed in the adapter. Only copper washers are to be used with this adapter.
13. Install compression seal washer (4), and use Tool (F) to install carbon dam seal (8) on the fuel injection nozzle.14. Put fuel injection nozzle (3) in position in the adapter, and install retainer (2).15. Use Tool (B) to tighten retainer (2) to a torque of 48 7 N.m (35 5 lb ft).16. Install fuel line (1). Tighten the nuts on the fuel line with Tooling (A) to a torque of 40 7 N.m (30 5 lb ft).End By:a. install valve covers
Start By:a. remove valve covers FLUID SPILLAGE CONTAINMENTCare must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to "Tools And Shop Product Guide", NENG2500, for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose fluids according to local regulations and mandates. 1. Use Tooling (A), and disconnect fuel line (1) at each end. Remove the fuel line from the engine. 2. Use Tool (B), and remove retainer (2) from the adapter.3. Remove the fuel injection nozzles with Tooling (C) as follows:a. Install the 6V-6983 Adapterand the 8T-3199 Screwinto nozzle assembly (3).b. Install the 8T-3198 Tubeover the 8T-3199 Screw.c. Use the 1B-4206 Nuton the 8T-3199 Screw.d. Use the 1B-4206 Nuton the 8T-3199 Screwto pull the fuel injection nozzle from the adapter.4. Remove compression seal (4) and carbon dam seal (8) from fuel injection nozzle (3).5. Use Tool (D), and remove adapter (6) from the cylinder head.6. Remove gasket (7) and seal (5) from adapter (6). The following steps are for installation of the fuel injection nozzles and adapters.7. Use Tool (E) to clean the bore in adapter (6). Use an open end wrench or tap driver to turn Tool (E).8. Inspect seal (5) for damage or wear. Replace the seal if necessary.9. Put washer (7) and seal (5) in position on adapter (6).10. Put liquid soap in the bores of the cylinder head and on seals (5) in the adapters.11. Put 5P-3931 Anti-Seize Compoundon the threads of adapter (6), and install the adapter in the cylinder head assembly.12. Use Tool (D), and tighten the adapter to a torque of 205 14 N.m (154 10 lb ft).
Make sure the correct compression seal washer (4) is used when the nozzle assembly is installed in the adapter. Only copper washers are to be used with this adapter.
13. Install compression seal washer (4), and use Tool (F) to install carbon dam seal (8) on the fuel injection nozzle.14. Put fuel injection nozzle (3) in position in the adapter, and install retainer (2).15. Use Tool (B) to tighten retainer (2) to a torque of 48 7 N.m (35 5 lb ft).16. Install fuel line (1). Tighten the nuts on the fuel line with Tooling (A) to a torque of 40 7 N.m (30 5 lb ft).End By:a. install valve covers
Cat SIS web machinery list:
Parts ring Caterpillar catalog:
651E, 657E, 657G, 797, 854G, 950B, 950B/950E, 950F, 950F II, 950G, 950G II, 950H, 960F, 962G, 962G II, 962H, 966D, 966F, 966F II, 966G, 966G II, 966H, 966K, 966M, 966M XE, 970F, 972G, 972G II, 992C, 9...
515, 525, 525B, 525C, 525D, 535B, 535C, 535D, 545, 545C, 545D, 555D, 928F, 938F, 938G, 938G II, 938H, 950 GC, 966K, 966M XE, 972M XE, IT28F, IT38F, IT38G, IT38G II, IT38H
120M, 12M, 140M, 14M, 160M, 16G, 16H, 16H NA, 16M, 613C, 613C II, 613G, 615C, 650B, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 768B, 769, 814B, 814F, 814F II, 824C, 824G, 824G II, 824H, 824K, 938G, 9...
936, 936F, 950B, 950B/950E, 950F, 950F II, 950G, 950G II, 950H, 950K, 960F, 962G, 962G II, 962H, 962K, 966C, 966H, 966K, 966M, 966R, G936, IT62G, IT62G II, IT62H, PM-201, PM-465, PM-565, PM-565B, R130...
797, 950H, 962H, 966H, 966K, 966M, 966M XE, 972H, 972K, 972M, 972M XE, 980C, 980F, 980F II, 980G, 980G II, 980H
824G II, 824H, 950H, 962H, 966H, 966K, 966M, 966M XE, 972H, 972K, 972M, 972M XE, D10R, D10T
735, 735B, 740, 740B, 824G, 824G II, 824H, 854G, 950H, 966G, 966G II, 966H, 966K, 966M, 966M XE, 972G, 972G II, 972H, 972K, 972M, 972M XE, AD30, D10N, D10R, D10T, D350E, D350E II, D400E, D400E II
1390, 2590, 320 L, 320B, 320C, 320D, 320D FM, 320D2, 320D2 L, 322 FM L, 322 LN, 322B L, 322B LN, 322C, 322C FM, 323D L, 323D LN, 323D SA, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E LN, 325 LN, 3...
966G, 966G II, 966H, 966K, 966M, 966M XE, 972G, 972G II, 972H, 972K, 972M, 972M XE
322 LN, 322B L, 322B LN, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 328D LCR, 330, 330 FM L, 330 L, 330B, 330B L, 330C FM, 330D FM, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 350, 350 ...
322 LN, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D LN, 324E LN, 325 LN, 325B L, 325C, 325D, 325D L, 328D LCR, 329D LN, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 3...
322C, 324D, 324D LN, 324E LN, 325C, 325D, 325D L, 328D LCR, 329D LN, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E L...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 30/30, 303, 303.5, 305, 305.5, 3054B, 306, 307, 307B, 307C, 308C, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 325C FM, 325C L, 325...
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140, 140M, 140M 2, 140M 3, 140M 3 AWD, 141, 14G, 14M, 153, 16, 160M, 160M 2, 160M 3, 160M 3 AWD, 173B, 183B, 191, 416D, 420D, 430D, 430E, 430F, 432D, 438D, ...
420D, 430D, 430E, 430F, 442E, 444E
2151242
RING
416D, 416E, 420D, 420E, 422E, 422F, 424D, 428D, 428E, 428F, 430D, 430E, 432D, 432E, 432F, 434E, 434F, 438D, 442D, 442E, 444E, 444F, 446D, 450E
416D, 416E, 420D, 420E, 422E, 422F, 424D, 428D, 428E, 428F, 430D, 430E, 432D, 432E, 432F, 434E, 434F, 438D, 442D, 442E, 444E, 444F, 446D, 450E
1924487
RING
416D, 416E, 420D, 422E, 424D, 428D, 428E, 430D, 432D, 438D, 442D
416D, 416E, 420D, 422E, 424D, 428D, 428E, 430D, 432D, 438D, 442D
416D, 416E, 420D, 422E, 424D, 428D, 428E, 430D, 432D, 438D, 442D, 450E, 450F
14E, 420E, 420F, 430D, 7A, 814S, 943, D4E, D7G
420E, 420F, 430D, 432E, 434E, 450E, 525C, 525D, 535C, 535D, 545C, 545D, 555D, 613G, 908, 953D, D5R LGP, D6K, D6K LGP, D6K XL, D6N, D6N LGP, TH460B, TH560B, TH580B
8U6970
RING-RETAINING
205B, 206B, 211B, 212B, 416D, 420D, 424D, 428D, 430D, 432D, 438D, 442D, 446D, 906H, 906H2, 907H, 907H2, 908H, 908H2, M312, M315, M318, M320
205B, 206B, 211B, 212B, 416D, 420D, 424D, 428D, 430D, 432D, 438D, 442D, 446D, 906H, 906H2, 907H, 907H2, 908H, 908H2, M312, M315, M318, M320
302.5, 302.5C, 420D, 420E, 428D, 428E, 430D, 430E, 432D, 432E, 438D, 442D, 442E, 450E, 530B, 615, 615C, 623B, 730, 906H, 906H2, 907H, 907H2, 980B, PM-465, PM-565B, TH350B, TH355B
420D, 420E, 428D, 428E, 430D, 430E, 432D, 432E, 438D, 442D, 442E, 450E, 902, 906H, 906H2, 907H, 907H2
2237561
RING-BACKUP
420D, 430D
420D, 430D