1583031 RING-BACKUP Caterpillar parts
988F, 988F II, R1700 II, R1700G
Rating:
Alternative (cross code) number:
CA1583031
158-3031
1583031
CA1583031
158-3031
1583031
Weight: 0.03 pounds 0 kg.
LOAD HAUL DUMP, WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
ZGZJYBL New Hydraulic Steering Pump For Eaton Char-Lynn T Series 158-3031-001 1583031001 158-3031 1583031
ZGZJYBL Item Name:Hydraulic Steering Pump || Item Number:158-3031-001 1583031001 158-3031 1583031 || Application:for Eaton Char-Lynn T Series || Attention: If you are unsure if the product is suitable for your machine model. In order not to delay your use of the parts, please provide your engine nameplate or serial number and part number, and we will help you confirm if it is suitable. To avoid unnecessary returns, please carefully check the product image and part number to ensure that it is the product you want. || Tip: If you need any other parts, please contact us - we are a professional sales team and have many products to offer to you. Many buyers are very satisfied with our service. You can get first-class products and high-quality services from us, believe me, you will have a pleasant shopping experience here.
ZGZJYBL Item Name:Hydraulic Steering Pump || Item Number:158-3031-001 1583031001 158-3031 1583031 || Application:for Eaton Char-Lynn T Series || Attention: If you are unsure if the product is suitable for your machine model. In order not to delay your use of the parts, please provide your engine nameplate or serial number and part number, and we will help you confirm if it is suitable. To avoid unnecessary returns, please carefully check the product image and part number to ensure that it is the product you want. || Tip: If you need any other parts, please contact us - we are a professional sales team and have many products to offer to you. Many buyers are very satisfied with our service. You can get first-class products and high-quality services from us, believe me, you will have a pleasant shopping experience here.
New Hydraulic Motor 158-3031-001 1583031001 158-3031 1583031 Compatible with Eaton Char-Lynn T Series
Starhycfa Product name:Hydraulic Motor || Part Number:158-3031-001 1583031001 158-3031 1583031 || APPlication:Compatible with Eaton Char-Lynn T Series || Please carefully compare the pictures or OE numbers to match your original parts before purchasing the product. || Please make sure that the model number, part number and photo is the same as yours before order. To Avoid placing wrong orders and wasting your precious time.
Starhycfa Product name:Hydraulic Motor || Part Number:158-3031-001 1583031001 158-3031 1583031 || APPlication:Compatible with Eaton Char-Lynn T Series || Please carefully compare the pictures or OE numbers to match your original parts before purchasing the product. || Please make sure that the model number, part number and photo is the same as yours before order. To Avoid placing wrong orders and wasting your precious time.
Zachager Hydraulic Motor for Char-Lynn Eaton 2000 Series, Hydraulic Replacement Motor Replaces OEM Char-Lynn 158-3031-001 1583031001 158-3031 1583031 Eaton Gerotor Hydraulic Motor Replacement
Zachager 【Part Number】158-3031-001 1583031001 158-3031 1583031 || 【Applicable】Applicable to Eaton Char-Lynn H series 158-3031-001 1583031001 158-3031 1583031 || 【Product Specifications I】Shaft size: 25 mm diameter, shaft end M8 x 1.25-6H thread; shaft key: square key, 8 x 30 mm; Shaft seal: NBR - standard; Valve system: Sliding valve; Front and rear bearing type: Plain bearing. || 【Product Specifications II】Geometric dimensions [cm3/r [in3/r]]: 131 [8.0]; Mounting flange dimensions [pilot diameter x height, bolt circle diameter, hole [mm [inch]]]: approx. 82.5 x 3.1, 106.4, 13.6 [3.25 x 0.12, 4.19, 0.54]; Mounting flange type: 4 bolt - magneto. || 【Warm Tips】Please check the specifications carefully to make sure you get the product you want. If you are not sure, you can send us your model number.
Zachager 【Part Number】158-3031-001 1583031001 158-3031 1583031 || 【Applicable】Applicable to Eaton Char-Lynn H series 158-3031-001 1583031001 158-3031 1583031 || 【Product Specifications I】Shaft size: 25 mm diameter, shaft end M8 x 1.25-6H thread; shaft key: square key, 8 x 30 mm; Shaft seal: NBR - standard; Valve system: Sliding valve; Front and rear bearing type: Plain bearing. || 【Product Specifications II】Geometric dimensions [cm3/r [in3/r]]: 131 [8.0]; Mounting flange dimensions [pilot diameter x height, bolt circle diameter, hole [mm [inch]]]: approx. 82.5 x 3.1, 106.4, 13.6 [3.25 x 0.12, 4.19, 0.54]; Mounting flange type: 4 bolt - magneto. || 【Warm Tips】Please check the specifications carefully to make sure you get the product you want. If you are not sure, you can send us your model number.
Number on catalog scheme:
8
For full view, you need register
Compatible equipment models: 1583031:
Information:
Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00566359
Typical example
Illustration 2 g00570609
Typical example
Thoroughly clean the threads on threaded nut (5) and the cylinder head.
Ensure that wire clip (6) is in position on fuel injection nozzle (3) .Note: Remove the original seat washer from the threaded hole for the fuel injection nozzle which is located in the cylinder head. If the original seat washer is not removed, the projection of the fuel injection nozzle will be incorrect when a new seat washer is installed. Do not reuse seat washer (4) .
Install a new seat washer (4) into the recess in the cylinder head.
Put a 2 mm (.08 inch) bead of 4C-5591 Anti-Seize Compound on the first two threads of threaded nut (5) .
Put fuel injection nozzle (3) into position in the cylinder head. Make sure that the detent ball in the fuel injection nozzle is aligned correctly with ball detent (X) in the cylinder head.
Carefully tighten threaded nut (5) to a torque of 30 N m (22 lb ft). Remove any excess Anti-Seize Compound from fuel injection nozzle (3) .Note: Do not rotate the fuel injection nozzle after installation. The seal which is made by the anti-seize compound may break. A broken seal may allow leakage past the seat of the fuel injection nozzle.
Illustration 3 g00570593
Typical example
Put tube assembly (2) in position on the fuel injection nozzles.
Install bolts (1) that hold tube assembly (2) in position.End By: Install the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00566359
Typical example
Illustration 2 g00570609
Typical example
Thoroughly clean the threads on threaded nut (5) and the cylinder head.
Ensure that wire clip (6) is in position on fuel injection nozzle (3) .Note: Remove the original seat washer from the threaded hole for the fuel injection nozzle which is located in the cylinder head. If the original seat washer is not removed, the projection of the fuel injection nozzle will be incorrect when a new seat washer is installed. Do not reuse seat washer (4) .
Install a new seat washer (4) into the recess in the cylinder head.
Put a 2 mm (.08 inch) bead of 4C-5591 Anti-Seize Compound on the first two threads of threaded nut (5) .
Put fuel injection nozzle (3) into position in the cylinder head. Make sure that the detent ball in the fuel injection nozzle is aligned correctly with ball detent (X) in the cylinder head.
Carefully tighten threaded nut (5) to a torque of 30 N m (22 lb ft). Remove any excess Anti-Seize Compound from fuel injection nozzle (3) .Note: Do not rotate the fuel injection nozzle after installation. The seal which is made by the anti-seize compound may break. A broken seal may allow leakage past the seat of the fuel injection nozzle.
Illustration 3 g00570593
Typical example
Put tube assembly (2) in position on the fuel injection nozzles.
Install bolts (1) that hold tube assembly (2) in position.End By: Install the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines - Remove and Install".
Caterpillar parts catalog:
Parts ring Caterpillar catalog:
834B, 836, 988F, 988F II, 992C, 992D, AS4173
5130, 950G, 950G II, 962G, 988B, 988F, 988F II, 992, R1700 II, R1700G, R2900
69D, 768C, 769, 769C, 769D, 770, 770G, 770G OEM, 771C, 771D, 772, 772B, 772G, 772G OEM, 773, 773B, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM, 950G, 9...
24H, 24M, 69D, 735, 735B, 740, 740B, 769C, 769D, 770, 770G, 770G OEM, 771C, 771D, 772, 772B, 772G, 772G OEM, 773B, 773D, 773E, 773F, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G LRC, 775G OEM, 834...
5130, 5130B, 988F, 988F II, 988G, 988H, D11R, D11T, R1700 II, R1700G, R2900
824G, 824G II, 824H, 824K, 980G, 980G II, 980H, 980K, 980K HLG, 980M, AD30, R1700G
834B, 834G, 834H, 834K, 986H, 988B, 988F, 988F II, 988G, 988H, 988K
988B, 988F, 988F II, R1700 II, R2900
988B, 988F, 988F II, R1700 II, R1700G, R2900, R2900G
824C, 980C, 980F, 980F II, AD40, AE40, D40D, R1700 II
824C, 980, 980B, 980C, 980F, 980F II, AD40, AE40, D35C, D40D, D44B, D550B, R1700 II
988K, 994, 994D, 994F, 994H, R1700 II, R1700G, R2900, R2900G
4P7364
RING-RETAINING
988B, 988F, 988F II
988B, 988F, 988F II
1004084
RING-RETAINING
988F, 990, 992D
988F, 990, 992D
844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992D, 992G, 992K, 993K, 994D, 994F, 994H
4E7515
RING-PRESSURE
980F, 980F II
980F, 980F II
950F, 950F II
950B, 950B/950E, 950F
773G, 773G OEM, 775G, 775G OEM, 776C, 776D, 777B, 777C, 777D, 777F, 777G, 784B, 784C, 785, 785B, 785C, 785D, 854G, 854K, 992G, 992K, 993K, D11N, D11R, D11T
5230, 854G, 992G, D11N, D11R
950G, 950G II, 950H, 950K, 962G, 962G II, 962H, 962K, 966G, 966G II, 966H, 966K, 972G, 972G II, 972H, 972K, 980G, 980G II, 980H, 980K, 990H
1002962
RING-CAM
960F
960F
3E3212
RING-RETAINING
844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992G, 992K, 993K
844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992G, 992K, 993K
970F, R1600, R1600G, R1600H