1655866 RING Caterpillar parts
311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR
Rating:
Alternative (cross code) number:
CA1655866
165-5866
1655866
CA1655866
165-5866
1655866
Weight: 0.02 pounds 0 kg.
Information:
ID
57
mm
THICKNESS
1.57
mm
TYPE
CIRCLIP-AXL
EXCAVATOR,
Compatible equipment models: 1655866:
Number on catalog scheme:
10
For full view, you need register
Information:
Illustration 1 g00732198
Turn the engine speed dial to the operating range.
Move the hydraulic lockout control to the UNLOCKED position.
Illustration 2 g02154513
Raise the boom enough in order to provide sufficient ground clearance.
Illustration 3 g01113024
Select the desired travel speed by operating the travel speed control switch.
Make sure that the position of the upper structure and of the undercarriage is known before you move the machine. The drive sprockets should be at the rear of the machine. Note: The directional steering controls will operate normally if the drive sprockets are at the rear of the machine. The idlers should be at the front of the machine and under the cab. When the sprockets are under the cab, the travel controls will operate backward.
Turn the engine speed dial in order to increase the engine speed (rpm) to the desired speed.
Push both travel levers forward at the same time in order to travel forward. If both travel levers are pushed farther, the travel speed at the selected engine speed (rpm) will be faster. Note: If the machine does not operate or if the machine does not travel in a straight line, consult your Caterpillar dealer.
See Operation and Maintenance Manual, "Operator Controls" for information about spot turning and about pivot turns.
When you make turns in soft material, travel in a forward direction occasionally in order to clear the tracks.
Slowly move both of the travel levers or both of the travel pedals to the CENTER position in order to stop the machine. Lifting Objects
If the machine is equipped with the CE plate per requirements for the European Union, used to lift objects, then the machine must be equipped with the optional boom lowering control valve and an overload warning device.A fit for purpose test was completed in order to confirm that a properly equipped machine meets the requirements of the European Union Machinery Directive "2006/42/EC" for lifting objects.The overload warning device (if equipped) must be adjusted for the bucket linkage and bucket size that is installed on the machine. Adjust the overload warning device for proper operation.The setting for the overload warning device (if equipped) should be checked by an authorized dealer.
Cat SIS web machinery list:
Parts ring Caterpillar catalog:
312D, 330D FM, 345B II, 345B L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C L MH, 568 FM LL
312D, 345B II, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C L MH, 982M
312D, 345B II, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C L MH, 966K, 966M, 966M XE, 972K, 972M,...
12F, 14E, 215, 215B, 225, 227, 229, 312D, 320B, 320C, 323D LN, 323D SA, 323E L, 325B L, 325C, 325D, 325D L, 325D MH, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330, 330B L, 330C, 330C L, ...
1290T, 2491, 2590, 312D, 325C, 325D FM, 325D FM LL, 328D LCR, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H...
312D2, 374D L, 374F L, 385B, 385C, 385C L, 390D, 390D L, 390F L
312D2, 374D L, 374F L, 385B, 385C, 385C L, 390D, 390D L, 390F L, 988K
312D2, 365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
312D2, 365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
312D2, 350, 350 L, 365B, 365B II, 365C, 365C L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5080, 5090B, 5110B
312D2, 365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
312D2, 350, 350 L, 365B, 365B II, 365C, 365C L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5080, 5090B, 5110B
311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR
2127347
RING-RETAINING
303, 304, 305, 305.5, 306
303, 304, 305, 305.5, 306
2070795
RING-RETAINING
303, 303.5C, 303C CR, 304, 304C CR, 305, 305.5, 305.5E, 305C CR, 306, 306E
303, 303.5C, 303C CR, 304, 304C CR, 305, 305.5, 305.5E, 305C CR, 306, 306E
2070798
RING-RETAINING
303, 304, 305, 305.5, 305.5E, 306, 306E
303, 304, 305, 305.5, 305.5E, 306, 306E
2004970
RING
304, 305
304, 305
2004969
RING
304, 305
304, 305
311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR
311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR
0995368
RING
308C, 311, 311B, 311C, 311D LRR, E110B
308C, 311, 311B, 311C, 311D LRR, E110B
308C, 311, 311B, 311C, 311D LRR, 312D, 312D L, 312E, 312E L, 313D, 314D CR, 314D LCR, 314E CR, 314E LCR, 320D, 320D L, 320D2, 320D2 L, 320E, 320E L, 320E LN, 324D, 324D L, 324E, 324E L, 324E LN, 329D,...
308D, 311B, 311C
3019823
RING
308C, 311C, 311D LRR, 311F LRR, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 320C, 320D LRR, 320D RR, 320E LRR, 320E RR, 321C, 321D LCR, 328D LCR, 345B II, 385B, 385C, 385C FS, 385C L, 385C L MH, 5090B
308C, 311C, 311D LRR, 311F LRR, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 320C, 320D LRR, 320D RR, 320E LRR, 320E RR, 321C, 321D LCR, 328D LCR, 345B II, 385B, 385C, 385C FS, 385C L, 385C L MH, 5090B