RING 1K7096 - Caterpillar

Illustration 18 g01003559
If necessary, use Tooling (C) to remove pin (33) (not shown) from the lower hitch.
Illustration 19 g01003560
Illustration 20 g01003564
If necessary, use Tooling (C) to remove pin (30) from the upper hitch. Remove shim pack (34) .
Illustration 21 g01003561
Pull the front frame away from the rear frame. Install Tooling (E) in order to support the front frame.
Illustration 22 g01003566
Illustration 23 g01003567
Remove bolts (35) , lower cap (38) , spacer (39) , upper cap (36) and shims (37) .
Illustration 24 g01003568
Remove lip seal (40) from lower cap (38) .
Illustration 25 g01003569
Remove lip seal (41) from upper cap (36) .
Illustration 26 g01003570
Illustration 27 g01003571
Remove bolts (42) from upper cap (43) .
Remove lower cap (45) .
Remove upper cap (43) and shims (44) .
Illustration 28 g01003572
Remove lip seal (46) from lower cap (45) .
Illustration 29 g01003573
Remove lip seal (47) from upper cap (43) .
Illustration 30 g01300128
Illustration 31 g01295499
Use Tooling (H) and (F) to remove bearing cones (48) and bearing cups (49) .
Illustration 32 g01300167
Illustration 33 g01300170
Use Tooling (H) and (G) to remove bearing cones (50) and bearing cups (51) .