RING-RETAINING 1N3257 - Caterpillar

Illustration 1 g03015077
Table 1
Specification for 241-6715 Accessory Drive Gp and 268-0055 Accessory Drive Gp
Item Qty Part Specification Description
1 1 199-2889 Idler Shaft Diameter is 105.880 0.020 mm (4.1685 0.0008 inch).
2 1 155-2307 Idler Gear As Bore of 116-1365 Bearing after assembly is 105.970 0.010 mm (4.1720 0.0004 inch).
3 1 7N-5874 Auxiliary Drive Shaft Diameter is 74.900 0.015 mm (2.9488 0.0006 inch).
Width of the groove for the thrust washer is 8.75 0.10 mm (0.344 0.004 inch).
4 2 7N-5246 Thrust Washer Thickness is 8.50 0.05 mm (0.335 0.002 inch).
5 4 - During assembly, align the hole in the bushing with the adapter assembly.
Bore of 127-5400 Bushing after assembly is 75.000 0.055 mm (2.9527 0.0022 inch).
6 6 - Before assembly, lightly lubricate the bore with the fluid that is being sealed.
7 2 7N-7539 Thrust Washer Thickness is 8.50 0.05 mm (0.335 0.002 inch).
8 1 241-4808 Shaft Diameter is 74.900 0.015 mm (2.9488 0.0006 inch).
Width of the groove for the thrust washer is 8.750 0.025 mm (0.3445 0.0010 inch).