2332589 RING-WEAR Caterpillar parts
416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 442D, 442E, 444E, 444F, 446D, 450E, 450F, 517, 527
Rating:
Alternative (cross code) number:
CA2332589
233-2589
2332589
CA2332589
233-2589
2332589
Weight: 0.04 pounds 0 kg.
Information:
AXIAL WIDTH
12.5
mm
ID
94
mm
MATERIAL
Nylon
OD
100
mm
THICKNESS
3
mm
BACKHOE LOADER, TRACK SKIDDER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
233-2589 2332589 Piston Guide WEAR Ring Fits Caterpillar Cat Spare Parts Replacement Aftermarket
Generic 【BACKHOE LOADER】416 420F2 424D 446D 416E 420D 432E 442D 420E 430D 442E 434E 422E 432D 444E 440 420 428D 416D 428E 416F2 450E 430E || 【TRACK SKIDDER】527 517
Generic 【BACKHOE LOADER】416 420F2 424D 446D 416E 420D 432E 442D 420E 430D 442E 434E 422E 432D 444E 440 420 428D 416D 428E 416F2 450E 430E || 【TRACK SKIDDER】527 517
233-2589 2332589 Piston Guide WEAR Ring Fits Caterpillar Cat Spare Parts Replacement Aftermarket
Generic 【BACKHOE LOADER】416 420F2 424D 446D 416E 420D 432E 442D 420E 430D 442E 434E 422E 432D 444E 440 420 428D 416D 428E 416F2 450E 430E || 【TRACK SKIDDER】527 517
Generic 【BACKHOE LOADER】416 420F2 424D 446D 416E 420D 432E 442D 420E 430D 442E 434E 422E 432D 444E 440 420 428D 416D 428E 416F2 450E 430E || 【TRACK SKIDDER】527 517
$11.85
11 Jan 2024
US: Florida-Parts-Z
2332589 - Ring-WEAR for Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
Number on catalog scheme:
6
For full view, you need register
2332589
Images:
Compatible equipment models: 2332589:
Information:
Generator Field Poles Removal And Installation
1. Remove the rotating field assembly from the generator. The hub (A) is serviced separately on all generators.2. Remove the bearing, brush holder and yoke. It is not necessary to remove the collector rings (1) from the shaft to remove the field poles.3. Disconnect and remove the wires (4) after marking them for reconnection. Each field pole (3) is dovetailed to the shaft spider (7) and is secured by one wedge (2) from each end. Each wedge is tack welded to prevent it from coming loose.
PREPARING TO REMOVE FIELD POLES
1. Collector ring. 2. Wedge. 3. Field pole. 4. Wires. 5. Weight. A. Hub.4. Bend the locks and remove the bolts and rotor coil supports (B) if so equipped. Some four-pole generators are equipped with laminated rotor coil supports.5. Using a drift the same size as the wedge, drive on the small end of one wedge (2) until the weld breaks. Remove the wedges.
PREPARING TO REMOVE COIL SUPPORTS
B. Rotor coil support.6. Remove the field poles.
INSTALLING FIELD POLE
6. Notch. 7. Spider.7. Make sure the mating members are free of foreign material and install the field pole, aligning the dovetail of the field pole with the notch (6) in the spider (7).
INSTALLING FIELD POLE
2. Wedge.8. Install one wedge, small end first, into each end of the notch and drive the wedge in as far as possible.9. Tack weld the large end of both the wedges.10. Install the rotor coil support, if so equipped.
USING TEMPLATE TO CHECK HEIGHTS OF BOLT HEADS
C. Template.
Before locking the bolts, make certain that all bolt heads are below the outer circumference of the field poles. A template (C) can be constructed and used for this purpose.
11. Connect the wires.12. Balance the rotating field assembly by removing or installing the weights (5). The use of a balancing machine is necessary to determine the number and location of such weights.
1. Remove the rotating field assembly from the generator. The hub (A) is serviced separately on all generators.2. Remove the bearing, brush holder and yoke. It is not necessary to remove the collector rings (1) from the shaft to remove the field poles.3. Disconnect and remove the wires (4) after marking them for reconnection. Each field pole (3) is dovetailed to the shaft spider (7) and is secured by one wedge (2) from each end. Each wedge is tack welded to prevent it from coming loose.
PREPARING TO REMOVE FIELD POLES
1. Collector ring. 2. Wedge. 3. Field pole. 4. Wires. 5. Weight. A. Hub.4. Bend the locks and remove the bolts and rotor coil supports (B) if so equipped. Some four-pole generators are equipped with laminated rotor coil supports.5. Using a drift the same size as the wedge, drive on the small end of one wedge (2) until the weld breaks. Remove the wedges.
PREPARING TO REMOVE COIL SUPPORTS
B. Rotor coil support.6. Remove the field poles.
INSTALLING FIELD POLE
6. Notch. 7. Spider.7. Make sure the mating members are free of foreign material and install the field pole, aligning the dovetail of the field pole with the notch (6) in the spider (7).
INSTALLING FIELD POLE
2. Wedge.8. Install one wedge, small end first, into each end of the notch and drive the wedge in as far as possible.9. Tack weld the large end of both the wedges.10. Install the rotor coil support, if so equipped.
USING TEMPLATE TO CHECK HEIGHTS OF BOLT HEADS
C. Template.
Before locking the bolts, make certain that all bolt heads are below the outer circumference of the field poles. A template (C) can be constructed and used for this purpose.
11. Connect the wires.12. Balance the rotating field assembly by removing or installing the weights (5). The use of a balancing machine is necessary to determine the number and location of such weights.
Cat SIS web machinery list:
Parts ring Caterpillar catalog:
517, 527, 561M, 561N, 613C, 613C II, 613G, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ, 936, 936F, 950B, 950B/950E, 950F, 950F II...
517, 527, 561M, 561N, 980, 980B, D5H, D5H XL, D5HTSK II, D5M, D5N, D5R LGP, D6M, D6N, D6N LGP, D6N OEM
525D, 527, 535D, 545D, 555D, 814B, 815B, 966D, 966F, D5H, D5H XL, D5HTSK II
1090, 1190, 320C FM, 320D, 320D FM, 320D FM RR, 517, 953C, D5H, D5H XL, D5HTSK II, D5R LGP, D6K LGP, D6K2, D6K2 LGP, D6M, D6N, D6N LGP, D6N OEM, OEMS, PL61, TK711, TK721
517, 527, 55, 561M, 561N, 572R, 572R II, 583R, 587R, 587T, 814, 815, 950, 955K, 955L, 966C, 992, D4H, D4H XL, D4HTSK II, D4HTSK III, D5, D5B, D5H, D5H XL, D5HTSK II, D5M, D5N, D6D, D6M, D6N, D6R, D6R ...
517, 527, 561M, 561N, 572R, 572R II, 583R, 587R, 587T, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, D5M, D5N, D6M, D6N, D6R, D6R II, D7R, D7R II, PL87
517, 527, 777, 785, 789, 814, 950, 955K, 955L, 966C, 980C, 988B, 992C, D10, D4H, D4H XL, D4HTSK II, D4HTSK III, D5, D5B, D5H, D5H XL, D5HTSK II
517, 518, 518C, 613, 613B, 613C, 613C II, 920, 930, 930R, 936, 936F, 941, 950, 955H, 966C, D250D, D4D, D4E, D4H, D4H XL, D4HTSK II, D4HTSK III, G936
120G, 12G, 130G, 140G, 160G, 517, 518, 528, 561M, 561N, 613G, 814, 815, 816, 920, 930, 950, 955H, 966C, D4H, D4H XL, D4HTSK II, D4HTSK III, D5M, D5N, D5R LGP, D6M, D6N, D6N LGP, D6N OEM
16G, 517, 527, 528, 528B, 530B, 615, 615C, 916, 920, 951B, D4H, D4H XL, D4HTSK II, D4HTSK III, FB518, IT28, IT28B
518, 527, 594, 594H, 769, 931B, D5C, D5HTSK II, D9E, D9G, D9H
517, 527, 953, D4HTSK II, D4HTSK III, D5HTSK II, D5M, D9R
416D, 416E, 420D, 420E, 422E, 424D, 428D, 428E, 430D, 430E, 432D, 432E, 434E, 442D, 442E, 444E, 446D, 450E, 527
416D, 416E, 420D, 420E, 430D, 430E
414E, 416D, 416E
3054C, 3054E, 414E, 416D, 416E, 422E, 422F, 424D, AP-300, C3.3, C4.4, CB-434D, CS-323C, CS-423E, TH210, TH215
2863030
RING-SEAL
3054C, 3054E, 414E, 416D, 416E, 416F, 420F, 422E, 422F, 424D, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, AP-300, C3.3, C4.4, CB-434D, CS-323C, CS-423E, PF-300C, TH210, TH215
3054C, 3054E, 414E, 416D, 416E, 416F, 420F, 422E, 422F, 424D, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, AP-300, C3.3, C4.4, CB-434D, CS-323C, CS-423E, PF-300C, TH210, TH215
2891204
RING
416D, 416E, 416F, 420D, 420E, 420F, 422E, 424D, 428D, 428E, 430D, 430E, 430F, 432D, 442D, 444E, 446D, 450E, 450F, 621H
416D, 416E, 416F, 420D, 420E, 420F, 422E, 424D, 428D, 428E, 430D, 430E, 430F, 432D, 442D, 444E, 446D, 450E, 450F, 621H
24M, 416E, 416F, 420E, 420F, 773G, 773G LRC, 775G, 775G LRC, 777G
120M, 120M 2, 12M, 12M 2, 140M, 140M 2, 14M, 160M, 160M 2, 16M, 24M, 311D LRR, 312D, 312D L, 312E, 312E L, 314E CR, 314E LCR, 315D L, 316E L, 318E L, 319D L, 319D LN, 320E, 320E L, 320E LN, 320E LRR, ...
302.5C, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 908H, 908H2
0965516
RING-RETAINING
2470C, 256C, 2570C, 262C, 2670C, 272C, 277C, 287C, 297C, 301.5, 302.5, 320C, 320D L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 385B, 385C, 385C FS, 385C L, 38...
2470C, 256C, 2570C, 262C, 2670C, 272C, 277C, 287C, 297C, 301.5, 302.5, 320C, 320D L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 385B, 385C, 385C FS, 385C L, 38...
206B, 307B, 307C, 308C, 414E, 416E, 416F, 420E, 420F, 422E, 422F, 424B, 424B HD, 428E, 428F, 430E, 430F, 432E, 432F, 442E, 904B, 904H, 910G, 933, 939, 966K, 966M XE, 972M XE, BH150, CP-433E, CP-44, CP...
2606480
RING-SNAP
120H, 120M, 12H, 12M, 135H, 140H, 140M, 143H, 14H, 14M, 160H, 160M, 163H, 16H, 16M, 24M, 416E, 420E, 430E, D3G, D3K XL, D4G, D4K XL, D5G, D5K LGP, D6K LGP, D6N, D6R II, D6R III, D6T, D7R II, D8T, D9T
120H, 120M, 12H, 12M, 135H, 140H, 140M, 143H, 14H, 14M, 160H, 160M, 163H, 16H, 16M, 24M, 416E, 420E, 430E, D3G, D3K XL, D4G, D4K XL, D5G, D5K LGP, D6K LGP, D6N, D6R II, D6R III, D6T, D7R II, D8T, D9T