RING-RETAINING 2501491 - Caterpillar

Illustration 17 g03888404
View of the body assembly in the upright position
Attach suitable lifting devices to the body assembly and position the body assembly into the upright position. The approximate weight of the body assembly (center, left-hand side, and right-hand side) is 25955 kg (57221 lb).
Finish welding the floor assembly.Note: For detailed parts information and welding details, refer to "Body Assembly Poster", SEHS0345.
Illustration 18 g06251152
Attach a suitable lifting device to canopy assembly (9). The approximate weight of the canopy assembly is 2661 kg (5866 lb).
Locate the front canopy assembly into the work area.
Illustration 19 g06251165
Align the canopy to the body assembly.Note: When you position the canopy, a guide line may be necessary.
Hold the canopy assembly in place with the lifting device until the canopy is assembled to the body assembly.
Illustration 20 g03891409
View of the front outside wall and canopy
(19) Nut
(21) Bolt
Secure the canopy assembly to the body assembly using four bolts (21), and four nuts (19).
Illustration 21 g03888661
View of the outside front wall of the body assembly and bottom side of the canopy assembly
(10) Plate
(20) Bolt
(22) Nut
Install bolts (20), and nuts (22) to secure the canopy assembly to the front wall at the locations shown in Illustration 21.
Finish welding the canopy assembly to the body assemblyNote: For detailed parts information and welding details, refer to "Body Assembly Poster", SEHS0345.
Install and weld plates (10) onto the canopy assembly.Note: For detailed parts information and welding details, refer to "Body Assembly Poster", SEHS0345.
Illustration 22 g03888703
View of the tabs on the right-hand side of the canopy assembly
Illustration 23 g03888736
View of the right-hand side of the canopy assembly
(12) Guard assembly
(13) Guard assembly
(14) Guard assembly
Use a suitable lifting device and Install guard assembly (14), guard assembly (13), and two guard assemblies (12) onto the right-hand side of the canopy assembly.Note: The approximate weight of guard assembly (12) is 64.4 kg (142 lb), guard assembly (13) is 47 kg (104 lb), and guard assembly (14) is 46 kg (101 lb).Note: Use the tabs shown in Illustration 22 to guide the guards into position.
Secure guard (14), guard (13), and two guards (12) into position.Note: For detailed parts information and welding details, refer to "Body Assembly Poster", SEHS0345.
Illustration 24 g03888753
View of the tabs on the left-hand side of the canopy assembly
Illustration 25 g03888755
View of the right-hand side of the canopy assembly
(12) Guard assembly
Use a suitable lifting device and Install guard assemblies (12) onto the left-hand side of the canopy assembly.Note: The approximate weight of guard assembly (12) is 64.4 kg (142 lb).Note: Use the tabs shown in Illustration 22 to guide the guards into position.Note: Refer to "Weld Types and Locations" for this procedure.
Secure guards (12) into position.Note: For detailed parts information and welding details, refer to "Body Assembly Poster", SEHS0345.
Illustration 26 g03888767
View of the right-hand side of the body assembly
(5) Plate
(23) Bolt
(24) Hard washer
Install plate (5) onto each side of the body assembly and secure into position using two hard washers (24) and two bolts (23).
Illustration 27 g06257987
Install serial number plate (2) and secure using four fasteners (25).Miscellaneous
Remove all lifting eyes, alignment blocks, lugs, stiffeners, and braces from