RING-PISTON 2542054 - Caterpillar

The new machine target has the following features:
The available ID's have been increased in order to allow more machines running ATS on a worksite. Refer to Table 2.
The usable reflection angle has been increased to 45 degrees. This allows the user to position the Total Station on a wall that is high.
The target must be used with Trimble SPS930 or SPS730 Total Stations on Track-Type Tractors and Motor Graders only.
When MT900 targets are used on M-Series motor graders, the minimum Implement ECM software is 314-2378 .
Table 2
ID's     Usage    
Channel 1 - 8     Surveying (1)    
Channel 9 - 16     Machine Control    
( 1 ) ID's 1-8 can be used for machine control as a last resort.Minimum Version Levels
Table 3 lists the minimum version levels of software that are required for the AccuGrade components. If the AccuGrade Version 10.71 Software is used with system components that have older versions of software, the "Diagnostics" screen will be displayed. The "Diagnostics" screen will show the correct version of software that is required.ReferenceRefer to the applicable Systems Operation, Troubleshooting, Testing and Adjusting, "Display Firmware Upgrade" for detailed information of upgrading the system firmware.Note: If the radio software is not the required version level, the radio will be listed as "Not Found" and the "Diagnostics" screen will continue to prompt the operator that a problem exists.
Table 3
   AccuGrade Version        
Device        Version    Firmware File    
276-6146 Angle Sensor     AS400     3.04     AS400304.s    
265-8047 Pitch Sensor     AS21     1.54     AS21154.s    
244-1717 GPS Receiver     MS980C     1.38     MS980138.s    
291-1913 GPS Receiver     MS990C     3.33     MS990333.s    
252-9696 Valve Module     VM410C     1.74     VM410174.s    
226-2333 Electric Mast     EM400C     1.86     EM400186.fls    
244-1714 Rotation Sensor     RS400C     1.89     RS400189.s    
253-8330 Sonic Tracer     ST400C     1.03     ST400103.s    
226-2334 Laser Receiver     LR400C     1.83     LR400183.fls    
253-8329 Laser Receiver     LR410C     1.88     LR410188.s    
291-1915 Laser Target As     MT900C     1.09     MT900109.s    
244-2424 Radio     TC900C     3.18     Refer to the "Radio" folder for firmware and instructions    
267-295x Radio     TC450C     1.28     Refer to the "Radio" folder for firmware and instructions    
279-1177 Radio     TC2400C     1.06     Refer to the "Radio" folder for firmware and instructions    The minimum versions of firmware, excluding the radio, are stored on the display under "upgrade firmware".The latest firmware is available on the download page of SIS web. The "Download Section" is accessed by clicking on the "Downloads" link (6) on the SIS web home page. Refer to Illustration 2.This download is a self-extracting zip file that contains all the current production software for AccuGrade 3D version 10.7 on Motor Graders, Track-Type Tractors, Excavators, and Compactors.Once the software is extracted, the software is broken into three main folders with sub-folders in order to help