RING-SNAP 2578738 - Caterpillar

TEBE8343-00
22Oct2018
U-593
A-429
D-518
O-525
TM-15
Safety
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE FAN ON CERTAIN C18, C27, 3412, 3412C, G3412, AND G3412C GENERATOR SETS
4457 PI11172
Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
This Program must be administered as soon as possible.When reporting the repair, use "PI11172" as the Part Number and "7751" as the Group Number, "56" as the Warranty ClaimDescription Code and "T" as the SIMS Description Code.
Exception: If the repair is done after failure, use "PI11172" as the Part Number, "7751" as the Group Number,"96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.
PROBLEM
The generator fan needs to be inspected on certain C18, C27, 3412, 3412C, G3412, and G3412C Generator Sets. The existing fan can crack (Image 1 in Action Required) during very early hour operation and may result in a flying object hazard. In conjunction with other factors or circumstances, these failures could result in a risk of personal injury or death.
AFFECTED PRODUCT
Model Identification Number
*******Group 1*******
3412 TWL00143-00146, 149-150
3412C DK601038, 1043, 1057, 1075, 1081, 1096, 1136-1137, 1147-1150, 1158, 1161, 1169-1170, 1270, 1272-1276
C18 SSM00196-00197, 200-211
SSW00155-00172
C27 2A300412-00413, 417-418, 420-421, 425-426, 432, 434-435, 437, 439, 442-444, 448-450, 458-465, 470, 474
*******Group 2*******
G3412 GNA00155-00157
KAP01167-01170, 1172
G3412C R7A00226
SPY00246-00247, 249-253, 255
PARTS NEEDED
No parts needed for this program
ACTION REQUIRED
Important Safety Information
Work safely. Most accidents that involve product operation, maintenance, and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs.
A person must be alert to potential hazards. This person should also have the necessary training, skills, and tools to perform these functions properly.
Safety precautions and warnings are provided in this instruction, on the product, and in this product's Operation and Maintenance Manual (OMM). If these hazard warnings are not heeded, bodily injury or death could occur to you or to other persons. Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard.
Therefore, the warnings in this publication, the warnings that are on the product, and the warnings that are in the OMM are not all inclusive. If a tool, a procedure, a work method, or operating technique that is not recommended by Caterpillar is used, the user must ensure that it is safe for the user and for other people to use.
The user should ensure that the product will not be damaged and the product will not be made unsafe by the operation, lubrication, maintenance, and the repair procedures that are used.
: The generator set must be isolated mechanically and electrically before and while the rework is being performed. Follow the proper lock out tag out procedures to protect against unintended operation, the unexpected movement, energizing, and startup of the generator set. Failure to follow these warnings could result in injury to personnel during