2632876 RING-SEAL Caterpillar parts
525D, 535D, 545D, 555D, 966M, 972M, CX28
Rating:
Alternative (cross code) number:
CA2632876
263-2876
2632876
CA2632876
263-2876
2632876
Weight: 0.06 pounds 0 kg.
TRANSMISSION-MILITARY, WHEEL SKIDDER,
Compatible equipment models: 2632876:
Information:
Caterpillar Electronically Controlled EnginesIn response to requests from the field, the ECAP has been modified to provide increased usability and reliability.
To make the ECAP easier to use, a POWER ON/OFF switch has been added near the Port One connector. By using this new switch, the operator will no longer have to disconnect and reconnect the power cable to recycle the ECAP.
The former plastic Port One connector has been replaced with a new metal connector. The new connector is less likely to break. Because of the new metal connector, a new "T-Harness" is required to connect the ECAP to the control and a new short cable is required to connect the ECAP to the 7X-1700 Communications Adapter (see the chart).
Additional cables have been released to allow the ECAP to retain power during engine cranking. Using these cables, the ECAP can be hooked up to an external power source as well as to the electronic control. To accomplish this, a short adapter cable "T-Harness" is inserted between the ECAP (4) and the T-Harness (3) that goes to the control. This is the 7X-1854 Adapter Cable (1) for an ECAP with the new metal Port One connector or the 7X-1855 Adapter Cable (2) for an ECAP with the former plastic Port One connector. The base of the 7X-1854 and 7X-1855 Adapter Cables has a two pin MS connector (A) that can connect through other cables to external power sources. See Illustration 1.
Illustration 1. Location to install the 7X-1854 (1) or 7X-1855 (2) Adapter Cable. Former 8T-5275 or new 7X-1412 T-Harness (3). ECAP (4). Two pin MS connector (A).The 5P-7366 Power Cable Assembly (5) connects between the two pin MS connector (A) and an external battery on the service truck or another piece of equipment. The 8T-9276 (6) and 8C-9705 (7) 12 Volt Converters can be used to provide power from an AC outlet. If the 8C-9705 (7) 12 Volt Converter is used, a 7X-1856 Adapter Cable (8) must also be used. See Illustration 2.
Illustration 2. 5P-7366 Power Cable Assembly (5). 8T-9276 12 Volt Converter (6). 8C-9705 12 Volt Converter (7). 7X-1856 Adapter Cable (8). Two pin MS connector (A). Battery (B). AC power source (C).
To make the ECAP easier to use, a POWER ON/OFF switch has been added near the Port One connector. By using this new switch, the operator will no longer have to disconnect and reconnect the power cable to recycle the ECAP.
The former plastic Port One connector has been replaced with a new metal connector. The new connector is less likely to break. Because of the new metal connector, a new "T-Harness" is required to connect the ECAP to the control and a new short cable is required to connect the ECAP to the 7X-1700 Communications Adapter (see the chart).
Additional cables have been released to allow the ECAP to retain power during engine cranking. Using these cables, the ECAP can be hooked up to an external power source as well as to the electronic control. To accomplish this, a short adapter cable "T-Harness" is inserted between the ECAP (4) and the T-Harness (3) that goes to the control. This is the 7X-1854 Adapter Cable (1) for an ECAP with the new metal Port One connector or the 7X-1855 Adapter Cable (2) for an ECAP with the former plastic Port One connector. The base of the 7X-1854 and 7X-1855 Adapter Cables has a two pin MS connector (A) that can connect through other cables to external power sources. See Illustration 1.
Illustration 1. Location to install the 7X-1854 (1) or 7X-1855 (2) Adapter Cable. Former 8T-5275 or new 7X-1412 T-Harness (3). ECAP (4). Two pin MS connector (A).The 5P-7366 Power Cable Assembly (5) connects between the two pin MS connector (A) and an external battery on the service truck or another piece of equipment. The 8T-9276 (6) and 8C-9705 (7) 12 Volt Converters can be used to provide power from an AC outlet. If the 8C-9705 (7) 12 Volt Converter is used, a 7X-1856 Adapter Cable (8) must also be used. See Illustration 2.
Illustration 2. 5P-7366 Power Cable Assembly (5). 8T-9276 12 Volt Converter (6). 8C-9705 12 Volt Converter (7). 7X-1856 Adapter Cable (8). Two pin MS connector (A). Battery (B). AC power source (C).
Cat SIS web machinery list:
Parts ring Caterpillar catalog:
1K6985
RING-RETAINING
120G, 120K, 120K 2, 120M, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 3, 12M 3 AWD, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 3, 140M 3 AWD, 143H, 14G, 14H NA, 160G, 160H, 160H ES...
120G, 120K, 120K 2, 120M, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 3, 12M 3 AWD, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 3, 140M 3 AWD, 143H, 14G, 14H NA, 160G, 160H, 160H ES...
5P2199
RING-BACKUP
120H, 120H ES, 120H NA, 120M, 120M 2, 12H, 12H ES, 12H NA, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140H, 140H ES, 140H NA, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14M, 160H, 160H ES, 160H NA, 160...
120H, 120H ES, 120H NA, 120M, 120M 2, 12H, 12H ES, 12H NA, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140H, 140H ES, 140H NA, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14M, 160H, 160H ES, 160H NA, 160...
1184019
RING
320B, 320C, 322B L, 322B LN, 322C FM, 325B L, 325C, 325C L, 325D MH, 330B L, 330C, 345B L, 350, 350 L, 5080, 525C, 535C, 545C, 545D, 555D, 613G, 623H, 623K, 623K LRC, 938H, 973D, D6R, D6R STD, D6T, D6...
320B, 320C, 322B L, 322B LN, 322C FM, 325B L, 325C, 325C L, 325D MH, 330B L, 330C, 345B L, 350, 350 L, 5080, 525C, 535C, 545C, 545D, 555D, 613G, 623H, 623K, 623K LRC, 938H, 973D, D6R, D6R STD, D6T, D6...
0673161
RING-RETAINING
1190T, 1290T, 2391, 2491, 30/30, 522, 522B, 532, 552, 552 2, 578, 589, 611, 615, 615C, 633E, 637E, 735, 735B, 740, 740B, 770G, 770G OEM, 814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 938H, ...
1190T, 1290T, 2391, 2491, 30/30, 522, 522B, 532, 552, 552 2, 578, 589, 611, 615, 615C, 633E, 637E, 735, 735B, 740, 740B, 770G, 770G OEM, 814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 938H, ...
2J7761
RING-RETAINING
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 16, 160G, 160H, 160H ES, 160H NA, 16...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 16, 160G, 160H, 160H ES, 160H NA, 16...
9J0705
RING-BACKUP
219D, 225, 227, 235, 245, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E LN, 320N, 321C, 321D LCR, 322B ...
219D, 225, 227, 235, 245, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E LN, 320N, 321C, 321D LCR, 322B ...
8E5737
RING-SEAL
515, 525, 525B, 525C, 525D, 535B, 535C, 535D, 545, 545C, 545D, 555D, 928F, 938F, 938G, 938G II, 938H, 950 GC, 966K, 966M XE, 972M XE, IT28F, IT38F, IT38G, IT38G II, IT38H
515, 525, 525B, 525C, 525D, 535B, 535C, 535D, 545, 545C, 545D, 555D, 928F, 938F, 938G, 938G II, 938H, 950 GC, 966K, 966M XE, 972M XE, IT28F, IT38F, IT38G, IT38G II, IT38H
8E5742
RING-SEAL
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H,...
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H,...
1627209
RING-BACKUP
824G II, 824H, 950H, 962H, 966H, 966K, 966M, 966M XE, 972H, 972K, 972M, 972M XE, D10R, D10T
824G II, 824H, 950H, 962H, 966H, 966K, 966M, 966M XE, 972H, 972K, 972M, 972M XE, D10R, D10T
2632875
RING-SEAL
525D, 535D, 545D, 555D, 966M, 972M, CX28
525D, 535D, 545D, 555D, 966M, 972M, CX28
7S7018
RING-SEAL METAL
730C, 824K, 825K, 826K, 844, 844H, 844K, 854G, 854K, 920, 930, 980K, 980K HLG, 980M, 982M, 986H, 990, 990 II, 990H, 990K, 992C, 992D, 992G, 992K, 993K, CX28, CX31, CX31-C13I, CX31-C15I, CX31-P600, CX3...
730C, 824K, 825K, 826K, 844, 844H, 844K, 854G, 854K, 920, 930, 980K, 980K HLG, 980M, 982M, 986H, 990, 990 II, 990H, 990K, 992C, 992D, 992G, 992K, 993K, CX28, CX31, CX31-C13I, CX31-C15I, CX31-P600, CX3...
5P6414
RING-RETAINING
525, 525B, 525C, 527, 535B, 535C, 545, 545C, 613C, 613C II, 613G, 814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 844, 844H, 844K, 854G, 854K, 938G II, 938H, 950F II, 950G, 950G II, 950H, 950...
525, 525B, 525C, 527, 535B, 535C, 545, 545C, 613C, 613C II, 613G, 814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 844, 844H, 844K, 854G, 854K, 938G II, 938H, 950F II, 950G, 950G II, 950H, 950...
3D2907
RING-RETAINING
14E, 621, 621B, 621E, 621F, 621G, 621H, 621K, 621R, 623, 623B, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631C, 631E, 631G, 633C, 633D, 633E II, 637D, 6...
14E, 621, 621B, 621E, 621F, 621G, 621H, 621K, 621R, 623, 623B, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 631C, 631E, 631G, 633C, 633D, 633E II, 637D, 6...
2741913
RING-SEAL
CX28
CX28
1570403
RING-PISTON
583T, 587T, CB-534C, CB-534D, CB-54, CB-64, CP-573E, CP-64, CS-573D, CX35-P800, D8N, D8R, D8T, PL61, PL83, PL87, TH31-E61, TH35-C15I, TH35-E81
583T, 587T, CB-534C, CB-534D, CB-54, CB-64, CP-573E, CP-64, CS-573D, CX35-P800, D8N, D8R, D8T, PL61, PL83, PL87, TH31-E61, TH35-C15I, TH35-E81
3P5726
RING-SEAL
120G, 12G, 130G, 140G, 160G, CX28, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II
120G, 12G, 130G, 140G, 160G, CX28, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II
1650507
RING-SEAL
CX28, TA19-M2WD, TA19-M4WD
CX28, TA19-M2WD, TA19-M4WD
3K8276
RING-RETAINING
561H, 561M, 561N, 931, CX28, D7F, PL61
561H, 561M, 561N, 931, CX28, D7F, PL61
2726435
RING-SEAL
CX28
CX28
2988699
RING
CX28
CX28