RING-SEAL 2799905 - Caterpillar

Illustration 6 g00559250
Position hose (46) on the fuel tank and install cable strap (45) .
Install aftercooler tube (42) to the fuel tank with clamp (43), bolt (44) and the washer.
Illustration 7 g00558301
Install dust ejector tube (41) to the bottom of the fuel tank. Use two clips (39), the two washers and two bolts (40) .
Illustration 8 g00558662
Install tube assembly (36), the two clamps, exhaust tube assembly (32) and tube (38) to the bracket with two clamps (35). Use two bolts (37), the two washers and the two nuts.
Illustration 9 g00558299
Slide exhaust tube assembly (32) toward the turbocharger. Install clamp (33) and tighten the clamp.
Install clamp (34) and tighten the clamp.
Illustration 10 g00558298
Install shield (30) to bracket (31) with four bolts (29) and the washers.
Illustration 11 g00558297
Position the wiring harness on the fuel tank. Connect quick couplers (28), (27) and (26) .
Illustration 12 g00558296
Install cooler bypass valve (25) to the fuel tank with two bolts (24) .
Illustration 13 g00558347
Illustration 14 g00558294
Install cable assembly (20), washer (23) and nut (22) to stud (21) .
Install boot (19) from cable assembly (20) .
Install starter relay (18) to the bracket. Use the two bolts and the two washers (not shown).
Illustration 15 g00558293
Install cable strap (15) in order to connect the air conditioning line to the fuel tank.
Install air conditioning dryer (17) to the bracket with two nuts (16) and the two washers.
Illustration 16 g00558292
Connect quick coupler (10) and install the cable straps to the back of the fuel tank.
Connect fuel line (11) and fuel line (13). Tighten hose clamp (14) and hose clamp (12) .
Position cable assembly (3) and the lines on the fuel tank with cable straps (9) .
Illustration 17 g00558291
Remove the piece of tube from valve (8) and close the valve.
Turn on two valves (7) .
Illustration 18 g00558288
Install cable assembly (3) and wire assembly (5) to the bottom of starter motor (6) with nut (4) and the washer.
Illustration 19 g00589491
Install cover (2) to the fuel tank with the two washers and two bolts (1) .
Connect the battery.End By:
Install the air cleaner. Refer to Disassembly and Assembly, "Air Cleaner - Remove and Install".
Install the muffler. Refer to Disassembly and Assembly, "Muffler - Remove and Install".