RING-SNAP 2980439 - Caterpillar

Introduction
This Special Instruction is organized into modules. Caterpillar suggests installing one module at a time. The instructions are written for 377-8018 Control Module Gp .Safety Section
Illustration 1 g00104545
Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls before you service the equipment. These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.Parts Section
Table 1
377-8018 Control Module Gp
Consists of
377-8019 Cab Wiring Gp
Revision -01    
Item    Qty    Part No    Description    
(1)     6     7K-1181     Cable Strap    
(2)     1     259-7180     Cover    
(3)     1     328-0401     Bracket    
(4)     1     336-5880     Toggle Switch Gp    
(5)     1     336-6279     Solenoid Harness As    
(6)     2     9X-2042     Screw    
Illustration 2 g02240953
Installation Section
Illustration 3 g02457716
(1) 7K-1181 Cable Strap (5) 336-6279 Solenoid Harness As
Install harness (5) .
Illustration 4 g03749157
(2) 259-7180 Cover (3) 328-0401 Bracket (4) 336-5880 Toggle Switch Gp (5) 336-6279 Solenoid Harness As (6) 9X-2042 Screw
Install switch (4), bracket (3), and cover plate (2). Use screws (2) .
Connect harness (5) to the switch, and the cab harness.
Illustration 5 g03749158
(1) 7K-1181 Cable Strap (5) 336-6279 Solenoid Harness As
Connect the other end of harness (5) to the panel at the rear of the cab.