RING-SIDE 2C0043 - Caterpillar

1. Disconnect oil lines (1), (2) and (3) from the swing motor.2. Remove one bolt from each side of the swing motor. 3. Install two 1/2"-13 NC forged eyebolts in the swing motor and fasten a hoist. Remove swing motor (4). Weight of the swing motor is 140 lb. (63 kg).Install Swing Motor
1. Install two 1/2"-13 NC forged eyebolts in the motor. Fasten a hoist and put the motor (1) in position on the swing drive cover.2. Install two bolts that hold the swing motor. Tighten the bolts to a torque of 200 20 lb.ft. (270 25 N m). 3. Connect oil lines (2), (3) and (4) to the swing motor.4. Fill the motor with SAE 10W hydraulic oil.
Do not start the engine with the motor not filled with oil.