RING-RETAINING 2W1249 - Caterpillar

Illustration 1 g06242450
Typical example
Table 1
Item Qty Part Specification Description
1 - - Torque to 2.5 0.5 N m (22.1 4.4 lb in).
2 1 8T-5400 Connector Torque to 0.35 0.05 N m (3.10 0.44 lb in).
3 4 - Tighten the bolt to 14 2 N m (124 18 lb in).
4 2 - Tighten the nut to 38 2 N m (336 18 lb in).
5 4 3E-8020 Screw Torque to 6 1 N m (53 9 lb in).
6 - - Tighten the nut to 9 1 N m (80 9 lb in).
7 - - Use the following tightening procedure during wiper arm installation:
1. Tighten the wiper arm nut to 21 1 N m (186 9 lb in).
2. Wait for minimum 0.5 hour to maximum 4 hours.
3. Again, tighten the wiper arm nut to 21 1 N m (186 9 lb in).
Field torque check: Tighten the wiper arm nut to 12 N m (106 lb in minimum).
8 - - Tighten the nut to 7.5 0.5 N m (66.4 4.4 lb in).