3402377 RING-RETAINING Caterpillar parts
793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ
Rating:
Alternative (cross code) number:
CA3402377
340-2377
3402377
CA3402377
340-2377
3402377
Weight: 0.47 pounds 0 kg.
TRUCK,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Sunsong 3402377 Power Steering Pressure Line Hose Assembly
Sunsong pressure hoses exceed original equipment performance standards (sae j2050) with a max working pressure of 1, 500 psi a burst pressure rating of 8, 700 psi and a tensile strength of 1, 600 lb. this provides exceptional durability and long life || all tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium iii), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose || hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. hoses have an operating temperature range of -40 to 310 degrees fahrenheit, exceeding original equipment requirements
Sunsong pressure hoses exceed original equipment performance standards (sae j2050) with a max working pressure of 1, 500 psi a burst pressure rating of 8, 700 psi and a tensile strength of 1, 600 lb. this provides exceptional durability and long life || all tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium iii), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose || hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. hoses have an operating temperature range of -40 to 310 degrees fahrenheit, exceeding original equipment requirements
A-Premium Power Steering Hose Pressure Line Hose Assembly Compatible with Hyundai Sonata 2006-2010 V6 3.3L From Pump
A-Premium [Vehicle Fitment]: This power steering pressure hose is compatible with Hyundai Sonata 2006-2010 V6 3.3L || [Position]: From Pump || [The Performance]: Hose Type: Power Steering Hose Assembly; Working Pressure: Up to 1500 psi; Burst Pressure: Up to 8700 psi; Tensile Strength: Up to 1600 lb; Working Temperature: -40°C to 154°C || [Reference Number]: The A-Premium power steering pressure line hose assembly's reference number: 575103K100, 3402377. Before placing an order, verify that this power steering tube is compatible with your vehicle using the compatibility system || [Buy with Confidence]: A-Premium offers a one-year unlimited-mileage guarantee on our meticulously crafted power steering hose. We offer a wide variety of automotive accessory categories, ensuring that you can hit the road with peace of mind.
A-Premium [Vehicle Fitment]: This power steering pressure hose is compatible with Hyundai Sonata 2006-2010 V6 3.3L || [Position]: From Pump || [The Performance]: Hose Type: Power Steering Hose Assembly; Working Pressure: Up to 1500 psi; Burst Pressure: Up to 8700 psi; Tensile Strength: Up to 1600 lb; Working Temperature: -40°C to 154°C || [Reference Number]: The A-Premium power steering pressure line hose assembly's reference number: 575103K100, 3402377. Before placing an order, verify that this power steering tube is compatible with your vehicle using the compatibility system || [Buy with Confidence]: A-Premium offers a one-year unlimited-mileage guarantee on our meticulously crafted power steering hose. We offer a wide variety of automotive accessory categories, ensuring that you can hit the road with peace of mind.
Sunsong 3402377 Power Steering Pressure Line Hose Assembly
Sunsong pressure hoses exceed original equipment performance standards (sae j2050) with a max working pressure of 1, 500 psi a burst pressure rating of 8, 700 psi and a tensile strength of 1, 600 lb. this provides exceptional durability and long life || all tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium iii), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose || hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. hoses have an operating temperature range of -40 to 310 degrees fahrenheit, exceeding original equipment requirements
Sunsong pressure hoses exceed original equipment performance standards (sae j2050) with a max working pressure of 1, 500 psi a burst pressure rating of 8, 700 psi and a tensile strength of 1, 600 lb. this provides exceptional durability and long life || all tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium iii), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose || hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. hoses have an operating temperature range of -40 to 310 degrees fahrenheit, exceeding original equipment requirements
Number on catalog scheme:
29
For full view, you need register
Compatible equipment models: 3402377:
Information:
Your engine may not have the same gauges or all of the gauges that are described. For more information about the gauge package, see the literature that is provided by the OEM.Gauges provide indications of engine performance. Ensure that the gauges are in good working order. Determine the normal operating range by observing the gauges over a period of time.Noticeable changes in gauge readings indicate potential gauge or engine problems. Problems may also be indicated by gauge readings that change even if the readings are within specifications. Determine the cause of any significant change in the readings. Then, correct any cause of any significant change in the readings. Consult your Caterpillar dealer for assistance.Caterpillar requires one lamp in addition to the gauge package that is normally provided. The "Diagnostic" lamp is yellow or amber. The "Diagnostic" lamp will communicate the status of the engine's electronic system. The optional red "Warning" lamp is also available. This red "Warning" lamp warns the operator of engine problems.The following conditions are some examples of the engine problems:
Low oil pressure
High coolant temperature
Low coolant level
High inlet air temperature
Engine Oil Pressure - Typical oil pressure for an engine at rated speed with SAE 10W30 or with SAE 15W40 is 240 to 480 kPa (35 to 70 psi).A lower oil pressure is normal at low idle. If the load is stable and the gauge reading changes, perform the following procedure:
Remove the load.
Reduce engine speed to low idle.
Check the oil level. Maintain the oil level at the proper amount. If the gauge continues to fluctuate, consult your Caterpillar dealer.The diagnostic lamp will turn on if the oil pressure drops below 35 kPa (5 psi) at low idle rpm. The diagnostic code will be logged in the Engine Control Module (ECM).
Engine Oil Temperature - This gauge indicates the engine oil temperature. An oil temperature that is higher than normal indicates a heat problem in the lubrication system and/or the cooling system. This problem can damage the cylinder heads, the cylinder liners, the pistons, and the crankshaft bearings.
Jacket Water Coolant Temperature - Typical temperature range is 88 to 102 °C (190 to 215 °F). The maximum allowable temperature with the pressurized cooling system is 105 °C (220 °F). Higher temperatures may occur under certain conditions. The water temperature reading may vary according to load. The reading should never exceed the boiling point for the pressurized system that is being used.If the engine is operating above the normal range or steam becomes apparent, perform the following procedure:
Reduce the load and the engine rpm.
Inspect the cooling system for leaks.
Determine if the engine must be shut down immediately or if the engine can be cooled by reducing the load.
Pressurized System: Hot coolant can cause serious burns. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure.
Check the coolant level.
Tachometer - This gauge indicates engine speed. When the throttle control lever
Low oil pressure
High coolant temperature
Low coolant level
High inlet air temperature
Engine Oil Pressure - Typical oil pressure for an engine at rated speed with SAE 10W30 or with SAE 15W40 is 240 to 480 kPa (35 to 70 psi).A lower oil pressure is normal at low idle. If the load is stable and the gauge reading changes, perform the following procedure:
Remove the load.
Reduce engine speed to low idle.
Check the oil level. Maintain the oil level at the proper amount. If the gauge continues to fluctuate, consult your Caterpillar dealer.The diagnostic lamp will turn on if the oil pressure drops below 35 kPa (5 psi) at low idle rpm. The diagnostic code will be logged in the Engine Control Module (ECM).
Engine Oil Temperature - This gauge indicates the engine oil temperature. An oil temperature that is higher than normal indicates a heat problem in the lubrication system and/or the cooling system. This problem can damage the cylinder heads, the cylinder liners, the pistons, and the crankshaft bearings.
Jacket Water Coolant Temperature - Typical temperature range is 88 to 102 °C (190 to 215 °F). The maximum allowable temperature with the pressurized cooling system is 105 °C (220 °F). Higher temperatures may occur under certain conditions. The water temperature reading may vary according to load. The reading should never exceed the boiling point for the pressurized system that is being used.If the engine is operating above the normal range or steam becomes apparent, perform the following procedure:
Reduce the load and the engine rpm.
Inspect the cooling system for leaks.
Determine if the engine must be shut down immediately or if the engine can be cooled by reducing the load.
Pressurized System: Hot coolant can cause serious burns. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure.
Check the coolant level.
Tachometer - This gauge indicates engine speed. When the throttle control lever
Caterpillar parts catalog:
Parts ring Caterpillar catalog:
793, 793B, 793C
793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ
769C, 769D, 771C, 771D, 772, 773, 773B, 773D, 775B, 775D, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C
345B II, 769D, 771D, 773D, 773E, 775D, 775E, 776D, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793C, 793D
784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B
320 L, 320B, 320B L, 320N, 345B, 345B L, 785, 785B, 785C, 789B, 789C, 793B, CB-534B, CB-534C, CB-634, CB-634C, CP-433C, CS-431C, E70B, OEMS
793, 793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ
793, 793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ
793, 793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ
793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ
793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, D10, D10N, D10R, D11N, D11R, D11T
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ
793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ
793, 793B, 793C
793, 793B, 793C
793, 793B, 793C
793, 793B, 793C
6E0247
RING-WEAR
793, 793B, 793C
793, 793B, 793C
5T6378
RING
772B, 773B, 773D, 775B, 775D, 784B, 784C, 785, 785B, 785C
772B, 773B, 773D, 775B, 775D, 784B, 784C, 785, 785B, 785C
772B, 773B, 776, 777, 777B, 784B, 785, 785B, 789, 789B
772B, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D
345B II, 769D, 771D, 773D, 773E, 775D, 775E, 776D, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793C, 793D
769C, 769D, 771C, 771D, 772, 773, 773B, 773D, 775B, 775D, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C