RING-BACKUP 3563305 - Caterpillar

Illustration 24 g01760262
Install clips (16).
Illustration 25 g01760258
Install clips (15).
Illustration 26 g01760254
Connect hose assembly (14).
Illustration 27 g01760093
Connect hose assemblies (13).
Illustration 28 g01760085
Connect hose assemblies (12).
Illustration 29 g01760076
Connect hose assemblies (11).
Illustration 30 g01760034
Connect hose assemblies (10). Connect harness assembly (9).
Illustration 31 g01759894
Connect hose assemblies (8).
Illustration 32 g01759876
Connect harness assemblies (7) and install the connecting hardware.
Illustration 33 g01759874
Install step (6).
Illustration 34 g01759213
Connect hose assembly (5).
Illustration 35 g01759173
Connect hose assemblies (4).
Illustration 36 g01759794
Illustration 37 g01759838
Use a suitable lifting device to position drive shaft (2). The weight of drive shaft (2) is approximately 68 kg (150 lb). Extend drive shaft (2) and install bolts (3). Tighten bolts (3) to a torque of 550 20 N m (406 15 lb ft). Remove the suitable blocking.
Illustration 38 g01759155
Install drive shaft guard (1).
Illustration 39 g06273514
Remove Tooling (A).
Fill the torque converter and the transmission. Refer to Operation and Maintenance Manual, "Torque Converter and Transmission Oil - Change".
Fill the hoist/brake hydraulic tank. Refer to Operation and Maintenance Manual, "Hoist and Brake Tank Oil - Change".
Fill the differential and final drive. Refer to Operation and Maintenance Manual, "Differential and Final Drive Oil - Change".End By:
Install the body and canopy.
Install the rear tires and rims.