RING-BACKUP 3942445 - Caterpillar

Illustration 1 g00928810After approximately one second, Illustration 1 appears in the display and the alert indicator turns on.The coolant temperature, hydraulic oil temperature, fuel level, and position of the engine speed dial are now indicated.The monitoring system checks the level of the engine coolant, engine oil, and hydraulic oil before the engine starts. If a low fluid level is detected during the fluid level check, the appropriate message will be displayed.Note: If more than one fluid level is low, the right and left key symbols will be indicated at the bottom right area of the warning message indicator. Press the right key or the left key to check other indicated warning messages. When the engine is started, the low fluid level indicators will disappear after 5 seconds.Note: Perform the fluid level check on level ground. The machine cannot perform an accurate fluid level check when the machine is on a slope. The monitor will cancel the fluid level check if the engine is started while the fluid level check is performed successfully. The service hours for the filters are checked first. Next, the service hours for fluids are checked. If a filter or a fluid is over the recommended change interval, "Check Fltr/Fluid Info" appears on the display. Refer to "Main Menu" for further information.