3K9263 RING Caterpillar parts
930, 941, 950, 955H
Rating:
Alternative (cross code) number:
CA3K9263
3K-9263
3K9263
CA3K9263
3K-9263
3K9263
Weight: 0.06 pounds 0 kg.
Information:
ID
48.26
mm
THICKNESS
5.26
mm
TYPE
ROUND SECT
TRACK LOADER, WHEEL LOADER,
Number on catalog scheme:
None
For full view, you need register
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01255150
Align the oil hole in the bearing and the oil hole in front adapter assembly (9). Use Tooling (A) and a suitable press to install bearing (11) into front adapter assembly (9). The bore of the bearing must be 75.0 0.055 mm (2.95 0.0020 inch) after installation.
Install O-ring seals (12) and (13) into front adapter assembly (9).
Illustration 2 g01255149
Place clean engine oil on the bearing and install shaft (6) in front adapter assembly (9).
Install retaining washer (10) and the bolts. Note: Later models have two retaining washers.
Illustration 3 g01255146
Position gear (8) on shaft (6) and install bolts (7).
Illustration 4 g01255143
Align the oil hole in the bearing and the oil hole in rear adapter assembly (1). Use Tooling (A) and a suitable press to install bearing (5) into rear adapter assembly (1). The bore of the bearing must be 75.0 0.055 mm (2.95 0.0020 inch) after installation.
Use Tooling (A) to install seal (4) into rear adapter assembly (1). Ensure that the lip of the seal is toward the bearing.
Illustration 5 g00906726
Install O-ring seals (2) and (3) into rear adapter assembly (1). Place clean engine oil on the O-ring seals. End By:
Install the accessory drive (front).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01255150
Align the oil hole in the bearing and the oil hole in front adapter assembly (9). Use Tooling (A) and a suitable press to install bearing (11) into front adapter assembly (9). The bore of the bearing must be 75.0 0.055 mm (2.95 0.0020 inch) after installation.
Install O-ring seals (12) and (13) into front adapter assembly (9).
Illustration 2 g01255149
Place clean engine oil on the bearing and install shaft (6) in front adapter assembly (9).
Install retaining washer (10) and the bolts. Note: Later models have two retaining washers.
Illustration 3 g01255146
Position gear (8) on shaft (6) and install bolts (7).
Illustration 4 g01255143
Align the oil hole in the bearing and the oil hole in rear adapter assembly (1). Use Tooling (A) and a suitable press to install bearing (5) into rear adapter assembly (1). The bore of the bearing must be 75.0 0.055 mm (2.95 0.0020 inch) after installation.
Use Tooling (A) to install seal (4) into rear adapter assembly (1). Ensure that the lip of the seal is toward the bearing.
Illustration 5 g00906726
Install O-ring seals (2) and (3) into rear adapter assembly (1). Place clean engine oil on the O-ring seals. End By:
Install the accessory drive (front).
Caterpillar parts catalog:
Parts ring Caterpillar catalog:
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 1674, 215, 225, 235, 330, 330 FM L, 330 L, 3304, 3304B, 3306, 330B, 330B L,...
1090, 1190, 1190T, 120, 120B, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 1290T, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140, 140B, 140H, 140H ES, 140H NA, 140K,...
14H, 14H NA, 14M, 16, 16H, 16H NA, 16M, 24H, 24M, 30/30, 320B FM LL, 320C FM, 320D, 320D FM, 320D FM RR, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C ...
120G, 12G, 130G, 140G, 14G, 14H, 14H NA, 160G, 16G, 16H, 16H NA, 55, 920, 930, 966K, 966M XE, 972M XE, CX28, CX48-P2300, D4H, D5H, D6D, D6H, D7E, D7E LGP, D7H
245, 924F, 924G, 924GZ, 924H, 924HZ, 924K, 928G, 928H, 928HZ, 930G, 930K, 941, 951B, D4D, D4E, D4E SR, IT24F, IT28G
14E, 16, 518, 518C, 528, 528B, 530B, 613, 613B, 627, 768B, 769, 814, 815, 824, 824B, 834, 920, 930, 941, 950, 951B, 955K, 955L, 966C, 983B, 988, 992, D4D, D8L, FB518
941, 955C, 955H, D4D
6A, 814B, 814F, 814F II, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 930, 930R, 950, 955K, 955L, 980C, 980F, 980G
824B, 920, 930, 930R, 950, 966C, 966R, 980B, 988, 992
615, 615C, 621B, 621E, 623E, 627E, 631E, 637D, 637E, 639D, 834B, 836, 988B, 992C, 994, 994D, D250B, D250E, D25C, D25D, D300D, D300E, D30C, D350C, D350E, D35C, D35HP, D400, D400E, D40D, R2900, R2900G, ...
518, 518C, 528, 528B, 530B, 613, 613B, 920, 930, 983, D7F, FB518
7M0349
RING
D9G
D9G
572G, 983, 983B, D7F, D7G, D7G2
7S2022
RING
983, 983B
983, 983B
953, 983, 983B
9F2396
RING
44
44
7J1629
RING
44
44
630B, 983, 983B, 988
7F8669
RING
941
941