RING-SEAL 3P5728 - Caterpillar

Illustration 1 g02841297
Typical example
Front view
Illustration 2 g02559976
Left side view
Table 1
Specification for 115-7841 Engine Oil Filter Gp and 242-6278 Engine Oil Filter Gp
Item Qty Part Specification Description
1 - - Before assembly, lightly lubricate the bore with clean engine oil.
2 1 2W-1969 Bypass Valve The bypass valve must move freely in the bore.
Start to open pressure is 287 7 kPa (42 1 psi).
Fully open pressure is 480 7 kPa (70 1 psi).
3 1 2W-1635 Spring Length under test force is 102.0 mm (4.02 inch).
Test force is 518 26 N (116 6 lb).
Free length after test is 143.4 mm (5.65 inch).
4 2 264-0450 Clamp As Use the following tightening sequence for the clamp assembly:
1. Snugly tighten the clamp assembly to the tube.
2. Tighten the bolts of the clamp assembly to the elbow to 47 9 N m (35 7 lb ft).
3. Tighten the bolts of the clamp assembly to the tube to 47 9 N m (35 7 lb ft).
5 2 100-8075 Clamp As
6 3 165-3931 Bolt Torque to 55 7 N m (41 5 lb ft).
7 3 0L-1143 Bolt Torque to 55 7 N m (41 5 lb ft).