RING-RETAINING 3P7313 - Caterpillar

Illustration 1 g02384936
Top viewTypical example
Table 1
Specification for 228-5504 Upper Frame and 228-5509 Upper Frame    
Item     Qty     Part     Specification Description    
Before assembly, use 5P-0960 Grease Cartridge in order to coat all the pin bores.    
1     As required, use the following shims in order to adjust the maximum lateral clearance to
1.0 mm (0.04 inch) for Gosselies facility.    
2 133-2427 Shim     Thickness is
0.5 mm (0.02 inch).    
4 093-0090 Shim     Thickness is
1.0 mm (0.04 inch).    
2     2     186-5663 Pin As     Diameter is
99.850 0.040 mm (3.9311 0.0016 inch).    
A     -     -     Clearance between the pin end and the side of the cab must be kept over
10.0 mm (0.39 inch).    
3     As required, use the following shims in order to adjust the maximum lateral clearance.
Lateral clearance for Gosselies facility is
1.0 mm (0.04 inch).
Lateral clearance except for Gosselies facility is
1.6 mm (0.06 inch)    
1 308-8781 Shim     Thickness is
0.5 mm (0.02 inch).    
2 308-8782 Shim     Thickness is
1.0 mm (0.04 inch).    
1 308-8783 Shim     Thickness is
2.0 mm (0.08 inch).    
4     1     260-2385 Pin As     Diameter is
109.85 0.04 mm (4.325 0.002 inch).